MONTREAL PARTS : OTHER FRONT SUSPENSION PARTS

Here is a diagram showing the location of some of the parts in this category.

Front and rear anti-roll bar set as used in our popular Montreal handling kit (see item code MN050). Comprises a thicker (stiffer) 29mm front bar and a thinner (less stiff) rear bar to work with our uprated, lowered springs. The rear bar is less stiff as...

105 series suspension ball joint kit - Includes a pair of lower ball joints, castor arm ball joints & adjustable top suspension arms.

105 series suspension ball joint kit - Includes a pair of lower ball joints, castor arm ball joints & top suspension arms.

Castor arm rod to fit all 105 Series Coupes, Saloons and Spiders.  

Castor arm ball joint to fit all 105 Series Coupes, Saloons, Spiders and Montreals.  

Top suspension arm - right side looking from the rear of the card. Includes bushes and ball joint. See item code SU027 for the same part for the left side of the car and SU031 and SU032 for adjustable versions. We recommend...

Top suspension arm - left side looking from the rear of the car. Includes bushes and ball joint. See item code SU028 for the same part for the right side of the car and SU031 and SU032 for adjustable versions. We recommend...

Top quality (Wurth brand) Nylock nut to fit the bottom ball joint bolts and also the propshaft rubber couplings on all 105 Series cars. Sold individually. 4 per car for the ball joints and 6 per car for the propshaft coupling.

Front suspension bottom ball joint to fit all 105 Series Coupes, Saloons, Spiders and Montreals. As this component has a very hard life in a 105 Alfa we have tested all the brands on the market (of Asian, Turkish & Italian origin) and have found these...

OE Quality front wheel bearing kit to fit 750, 101 and 105 Series cars. Includes inner and outer bearings, oil seal. Also suitable for 1900 ** NOTE ** - We will supply either FAG or SKF as supply can be sporadic for both brands.

Front wheel bearing kit to fit 750, 101 and 105 Series cars. Includes inner and outer bearings and oil seal.

Front wheel stub axle/hub washer. To suit all 105 Series cars.

Front wheel stub axle nut, right hand thread. To suit all 105 Series cars

Front wheel stub axle nut, left hand thread. To suit all 750, 101 and 105 Series cars.

Front wheel bearing grease cap to suit all 750, 101 and 105 Series cars.

Spacer washer for the lower wishbone bush on all 105 series cars. One washer used per bush. Bushes are available separately under item code SU042. Wishbone bush nut under item code SU042/1. Tab washer SU043/1. Cap under item code SU043.

Bottom front wishbone bush end nut for all 105/115 Series cars. 2 required per side, 4 in total per car. 

Bottom front wishbone bush for all 105/115 Series cars. 2 required per side, 4 in total per car. 

Top quality (Würth brand) nylock nut to fit the 4 front suspension wishbone mounting to crossmember bolts on all 105 Series cars 1967 onwards (4 per side, 8 per car) as well as attaching the steering arm to the front suspension upright - 2 nuts per side...

Tab washer for the lower wishbone bush on all 105 series cars. One washer used per bush. The bushes are available separately under item code SU042 and end caps under item code SU043.

Spacer for the thinner versions of the castor arm bush usually fitted to cars up to the mid/late 1970s. Fits where the castor arm attaches to the top arm of the front suspension. Not required on cars with Superflex polyurethane bushes, but often missing...

Polyurethane castor arm bush to fit in the top suspension arm on all 105 Series cars. A worthwhile replacement for the standard rubber bush and much more long-lasting. We recommend Superflex as they only use very high quality TDI polyurethane as opposed...

Top quality (Würth brand)nylock nut to fit the rear mounting bolt of the rear suspension trailing arm as well as the bolt on the inner side of the top front suspension arm.