75-MILANO PARTS : SINGLE GASKETS 4 CYL

We are taking delivery of 75 parts every week and will be adding them to our website as soon as they are unboxed and photographed.

Top quality cylinder head gasket for all 1600cc engines (101, 105, 115, 116 and 75). It has all the correct coolant holes. Please see pictures.

Valve/Cam cover gasket to fit 105, 116 and 75 engines (excluding TS and V6). With silicon beading to improve sealing. For engines without bolts at the front of the cam cover please see EN110/1.

High quality upper sump gasket with silicon beading for improved sealing (better than the original Alfa item!). For 101, 105, 116 and 75 engines (excluding V6). Gasket for where the oil pan connects to the engine block.

Gasket for the fuel pump mounted on the lower front timing cover on carburettored 101 Normale and 105 Series cars plus 116 and 75 models with carbs.. There should be two gaskets fitted - one either side of the plastic insulating spacer block...

Timing cover "O" ring. Please see pictures for fitting location. 

Pair of front timing cover gaskets 1600 engine. 

Pair of front timing cover gaskets 1750/1800 engine. 

Pair of front timing cover gaskets for 2000 engine (not TS).

Composite cylinder head to exhaust manifold gasket to suit 75 twin spark engine. Also fits 1300 750 & 101 Veloce.

Inlet manifold gasket to suit Bosch fuel injected Spiders from 1988-93 plus some fuel injected 116 and 75 models (not TS or V6).

Copper cylinder head to exhaust manifold gasket to suit all 101 and 105 series engines plus 4 cylinder 116 models and 4 cylinder 75 engines (not TS).

45mm paper carburettor gasket. ** NOTE ** - Unmodified cars will use the 40mm gasket instead (FL021).

Gasket to fit between the air intake trough/plenum and the carburettor body on all carburettored 105, 116 and 75 engines (not TS or V6).

Cylinder liner seal to fit all 2000cc engines, including Twin-Spark motors. Sold individually.

Cylinder liner seal to fit all 1600 and 1750 (1779cc) 'Nord' engines as well as Montreal V8 engines. Sold individually.

Inlet manifold gasket to fit all twin carburettor 105 series cars and Spica equipped models. Plus 116 and 75 models with carburettors (excluding V6 and TS). For early single carburettor cars see code FL022/1 and for later Fuel Injected cars see FL039...

Set of six 'washers' (four fibre, two aluminium) for the cam/valve cover hold down bolts on all 101, 105, 116 and 75 engines (excluding Ts and V6). The same washers are also used on Montreal engines - please enquire in need. Note that the aluminium...

A pair of 'half moon' rubber seals for the back of the camshaft housing at the rear of the cylinder head on 4 cylinder 105, 116 and 75 engines.

Gasket to fit the engine block rear cover plate on 750, 101, 105, 116 and 75 engines (excluding TS and V6).

Set of 6 'O' rings for 101, 105, 116 and 75 series head gaskets (excluding V6 and TS). 

Athena head gasket for 2 litre Twin-Spark (75) engine. Includes 6 viton oil rings. 

Valve cover gasket for 2 litre Twin-Spark (75) engine. .

 Reinz head gasket for 2 litre Twin-Spark (75) engine. Includes 6 viton oil rings.