750-101 SPRINT SS Ti PARTS : FUEL

Misab carburettor washer set to suit cars with solid carb mounts. These gaskets will do 40mm/45mm/48mm carbs and are compatible with Webers, Dell'orto Solex.

In tank fuel filter element to suit all 750/101/102/106 series cars.

Fuel tank sender for 750 and 101 series cars. 

Fuel pump overhaul kit for 750 series cars.  Cars with Fispa pump mounted on cylinder head. 

Spindle for the Weber 40 DCO3 carburettor. Originally fitted to the 750 Veloce cars.

Full overhaul kit for the Weber 40 DCO3 carburettor. Originally fitted to the 750 veloce cars. Kit contains: Needle valve size 175. Top cover gasket. Jet cover gasket. Base gaskets. Washers. 3 split pins.  Please note, this kit will refurbish one...

Gasket, single carburettor. 

Full overhaul kit for the Solex APAI-G downdraught carburettor fitted to some 750 and 101 series "Normale" cars.

Full carburettor overhaul kit to suit the downdraught Solex 32 PAIA as fitted to Normale cars from the late 1950s onwards.

Rubber carb mounts to fit 750 Series Veloce engines.  

Mechanical fuel pump to fit all carburettor-equipped 105 series cars plus 101 series 1300 and 1600 Normale cars. Also fits some Alfetta models. Mounting gaskets and plastic spacer blocks are available separately. This is a new production...

Rubber style carburettor mounting kit (for a pair of carburettors) to suit cars that are using a solid alloy carb mount. This is a good alternative/upgrade to the regular thackery washers that are normally used.

Thackery washer, carburettor mounting. 5/16 - M8 fitting. 

Gasket that fits between the engine block and the angled fuel pump mount on 101 and early 105 series models.

Aluminium blanking plate to seal off the mechanical fuel pump mounting on 101 and 105 series cars with cartridge oil filter. This is used when fitting an electric fuel pump to the car.

Aluminium blanking plate to seal off the mechanical fuel pump mounting on carb equipped 101, 105, 116 and 75 models. This is used when fitting an electric fuel pump to the car.    

Plastic mounting spacer to suit mechanical fuel pumps mounted down on the front timing cover of the engine. Fitted to most carburettor equipped 101, 105, 116 and 75 models.

Fuel sender cover  to fit 750 & 101 Giulietta/Giulia Sprint & Spider boot floor. 

Single carburettor air box strap. fitted on 750 & 101 cars. 

Adaptor plate to allow fitment of standard air filter housing.  ** ONLY SUITABLE FOR 101 GIULIA ** IF FITTED TO A 1300 CAR YOU MAY HAVE CLEARANCE ISSUES WITH THE BONNET (HOOD).

Useful in-line universal fuel filter that can serve as additional fuel filtration or as a cheap replacement for the original filter unit. Suitable for all carburettor-equipped models.

Carburettor rubber mount to suit 40mm Weber, Dellorto and Solex carburettors. Used on all 105 series GT/GTV, Saloons and Spiders, early 116 4 cylinder as well as 101 Series Veloce cars. Normally 4 required per car. Paper gaskets for each side of...

Air filter to carburettor air intake plenum hose/elbow to suit Veloce cars.

Bush for the bottom of the carburettor stay arm on 750 and 101 Series Veloce cars.