MONTREAL PARTS : BRAKES

Rubber plug brake master cylinder, 20mm diameter. Used to connect the reservoir to the master cylinder. 

Bleed screw cap. Will fit all bleed screws.  

Brake disc/drum retaining screw.

Large sized brake caliper bleed screw to fit 1750/2000 ATE front brake calipers.

Small sized brake caliper bleed screw to fit 1300/1600 small ATE front brake calipers and all ATE rear brake calipers.  

Caliper seal kit to fit all ATE rear brake calipers - one kit does two calipers. Note, if you are splitting the caliper apart, this kit does not include the small internal 'O' rings in the calipers. These are sold separately under item code BR086. 2...

Caliper seal kit to fit all ATE front brake calipers - one kit does two calipers. Note, if you are splitting the caliper apart, this kit does not include the small internal 'O' rings in the calipers. These are sold separately under item code BR086. 2...

Steel spring clip to fit the dust seals on the 38mm diameter piston ATE rear brake calipers fitted to all ATE braked 105 series cars from about 1967 onwards. Should be used in conjunction with the kits available under item code BR036 or BR082.2 required...

Steel spring clip to fit the dust seals on the 48mm diameter piston ATE front brake calipers fitted to all ATE braked 105 series cars and some 116 and 75 models. Should be used in conjunction with the kits available under item code BR035 or BR081. 2...

Rebuild kit to suit all rear ATE brake calipers, including new pistons and seals. With a piston diameter of 38mm this kit will suit all ATE rear calipers from 1967 onward. Note that the pistons are cup shaped and do not have the original-style central...

Rebuild kit for both front ATE brake calipers, including new pistons and seals. With a piston diameter of 48mm this kit will suit both 1300/1600 (smaller) and 1750/2000 (large) ATE front calipers from 1967 onward. This kit will do both front calipers...

BREMBO Brake master cylinder 22mm - for all LHD cars with hanging pedals, 1970 onwards and RHD Spiders from 1984-93. Also fits post 1973 Montreals - LHD and RHD and all Alfetta transaxle cars (116 series). if you require the unions, please click on...

Brake master cylinder repair kit to suit left hand drive ATE 22mm master cylinders, usually found on left hand drive 105 series cars 1970-93 and later (post 1973) Montreals. Also fitted on RHD conversion Spiders from 1978 to 1993.

Brake master cylinder repair kit to suit left hand drive ATE 20mm master cylinders, usually found on early (1970-72) left hand drive hanging pedals 105 series cars inc. Montreals. For more common 22mm repair kit please see part BR011/2.

Brake servo vacuum hose to fit all 105 Series cars with brake servos. RHD dual brake circuit cars and LHD dual circuit 1750s with standing pedals require two hoses. Can also be fitted on 2.0 116 cars. Please see WA071 for the correct sized jubilee...

New brake servo to fit all left hand drive cars 105 Series cars with hanging pedals, 1970 onwards, including Montreals.

Brake light switch to suit left hand drive cars with hanging pedals up to the end of the Series 3 Spider range.

3 way brake union to fit on the rear axle of all 105 Series cars including Montreals. Alsp fits some 750 and 101 Series cars. This hoses are compatible with 3/8 UNF unions under the code BR323

Handbrake shoes Kit - Includes Side cables BR055 & BR056, , X2 short handbrake shoe spring BR094,  X2 long handbrake shoe spring BR095, X2 handbrake adjuster mechanism BR076,  X4 handbrake shoe retaining spring BR054, X4 handbrake shoe retaining pin...

BREMBO Handbrake shoes - set of 4 to suit all cars with ATE brake systems 1967 onwards. Fits inside in the 'brake drum' inside the rear brake disc. One set of 4 brake shoes per car.

Handbrake shoes - set of 4 to suit all cars with ATE brake systems 1967 onwards. Fits inside in the 'brake drum' inside the rear brake disc. One set of 4 brake shoes per car.

Montral handbrake cable, specific for the Montreal. 

Pair of handbrake side cable, specific for the Montreal. 

Handbrake shoe retaining pin holder to fit the handbrake mechanism on 2000 (LSD) axle 105/115 cars from 1972-1993. 1 used per brake shoe, 4 used per car. The earlier pressed type is currently unavailable. Size 13.5mm narrowest diameter  X 18mm widest...