105 COUPE PARTS : OTHER BRAKE PARTS

Brake flexi hose for the rear of all 105 series cars including Montreals, as well as 750 and 101 Series cars. Goes from the body to the rear axle. ONE PER CAR! Will also fit the hydraulic clutch hose on 2600 (106) cars. These hoses are compatible...

Brake flexi hose to fit the front brake system (between brake lines and calipers/drums) on all 105 Series cars including Montreals, as well as 750, 101 and 106 (2600) Series cars. These hoses are compatible with 3/8 UNF unions under the code BR322

Round brake fluid reservoir for early 105 cars 1963-67. Note that the outlet thread is 7/16 BSF, like original. See BR305 for the correct union.

Cupro-nickel short front brake pipe from the flexible line to the brake caliper on ATE braked cars from 1968-93 with large front calipers (1750+2000 models) including Montreals. If you require copper see BR070.

Short front copper brake pipe from the flexible line to the brake caliper on all Dunlop braked cars from 1964-66. 

1300cc and 1600cc 105 Series cars are fitted with smaller front ATE brake calipers from 1968 to 1978. This cupro nickel brake pipe fits from the front flexible line onto the smaller front ATE caliper on these models. Two pipes required per car - one each...

1300cc and 1600cc 105 Series cars are fitted with smaller front ATE brake calipers from 1968 to 1978. This copper brake pipe fits from the front flexible line onto the smaller front ATE caliper on these models. Two pipes required per car - one each side...

Short front brake pipe from the flexible line to the brake caliper on ATE braked cars from 1968-93 with large front calipers (1750+2000 models) including Montreals. Please specify if you require copper or cupro-nickel pipe on your order.

Rubber grommet for the inner guard/wing where the hydraulic brake pipe passes through the metalwork. Two required per car - one on each side. Also fit Montreal bonnet emergency release cable and the grommets for the headlight vacuum pipe.

New production of the Dunlop front brake calipers as fitted to all 105 Series cars 1963-66, including Giulia saloons, Sprint GT & Sprint GTV, Giulia GTC and 1600 GTA models. Now cast in aluminium with a fantastic 50% weight saving over...

Bleed screw cap. Will fit all bleed screws.  

Brake disc/drum retaining screw.

Rubber plug brake master cylinder, 15mm diameter. Used to connect the reservoir to the master cylinder.

Rubber plug brake master cylinder, 20mm diameter. Used to connect the reservoir to the master cylinder.

Reservoir cap to fit the left hand drive clutch master cylinder reservoir. This cap will also fit the brake fluid reservoir on right hand drive 105 Series cars 1968 onwards and left hand drive cars 1968-70 with hydraulic clutch and single...

New, reproduction small front brake caliper right side (ATE fitment) - to fit 1300/1600 105 series cars plus some 116 models of any engine size. No exchange necessary. We may still buy your old core unit if you are in the UK. Please email us for further...

New, reproduction small front brake caliper left side (ATE fitment) - to fit 1300/1600 105 series cars plus some 116 models of any engine size. No exchange necessary. We may still buy your old core unit if you are in the UK. Please email us for further...

Rebuilt small front brake caliper (ATE fitment) - right side - to fit 1300/1600 cars. Please note some of our stock are rebuilt reproduction calipers, we cannot guarantee you will receive a caliper with original ATE markings. Please note this...

Rebuilt small front brake caliper (ATE fitment) - left side - to fit 1300/1600 cars. Please note some of our stock are rebuilt reproduction calipers, we cannot guarantee you will receive a caliper with original ATE markings. Please note this...

New, reproduction right front brake caliper (ATE fitment) to suit 1750 & 2000 engined 105 Series cars and all Spiders 1967-93. No exchange required.  

New, reproduction left front brake caliper (ATE fitment) to suit 1750 & 2000 engined 105 Series cars and all Spiders 1967-93. No exchange required.

Rebuilt large front brake caliper (ATE fitment) - right side - to fit 1750/2000 cars. Please note some of our stock are rebuilt reproduction calipers, we cannot guarantee you will receive a caliper with original ATE markings. Please note this part...

Rebuilt large front brake caliper (ATE fitment) - left side - to fit 1750/2000 cars. Please note some of our stock are rebuilt reproduction calipers, we cannot guarantee you will receive a caliper with original ATE markings. Please note this...

New, reproduction right side rear brake caliper (ATE fitment) to fit all cars 1967 - 1993. No exchange required.