105 COUPE PARTS : COOLING

Early silicone hose kit to suit all 105 series carburettor cars to 1968. This kit includes top, bottom radiator hose and the two heater hoses.

Late silicone hose kit to suit all 105 series carburettor cars from 1968 onwards. This kit includes top, bottom radiator hose, bypass hose and the two heater hoses. Not suitable for 1750 cars.

Athesil RTV silicone sealant. A premium sealant/ gasket maker developed by Athena for professional use in engine maintainace and repair. The RTV (room temperature vulcanizing) silicone seals plastic metal componants, crankcases, manifolds ...

Alloy T-Piece for the bottom radiator hoses. Fitted on all 1750 engines 1968 to 1972. Classic Alfa production.

Approximately 4 feet/1.2m of straight heater hose to fit all 105 Series cars.

Moulded heater hose shaped to suit the later heater unit as found in Kammtail/Series 2 Spiders, 1750/2000 GTVs & GT Juniors and Giulia and Berlina Saloons from about 1968 onwards. Specifications changed at different times on...

Moulded heater hose shaped to suit the earlier heater unit as found in Roundtail Spiders, Sprint GT & GTVs and Giulia Saloons up to about 1968. Specifications changed at different times on different models, so you need to check what your car is...

Bottom radiator hose to fit all Spica mechanical fuel injected cars. Goes from the radiator to the water pump.

Set of 3 bottom radiator hoses to suit 1750 engines 1968 to 1972.

Bypass hose to suit all 3 outlet waterpump cars from about 1970 through to 1987, both 105 and 4 cylinder 116 models. Goes from the water pump to the bottom of the inlet manifold underneath the thermostat housing.

Radiator bottom hose to suit 105 series cars - including USA spec Bosch injected cars - from 1968 to 1988. Does not fit cars with SPICA fuel injection, use WA014.

Radiator bottom hose to suit all 105 series cars up to 1967.

Radiator top hose to suit all 105 series carburettor cars from about 1968 onwards. This suits all cars with the radiator thermostat located in a separate housing on the inlet manifold. For earlier cars with the thermostat screwed into the inlet manifold...

Radiator top hose with large diameter end to suit all cars with inlet manifolds fitted with screw-in thermostats. See part WA009 for later cars with thermostats mounted in housings on the inlet manifold. Also fits some 101 Series Veloce cars...

Approximately 4 feet/1.2m of straight silicone heater hose to fit all 105 Series cars.

Silicone moulded heater hose shaped to suit the later heater unit as found in Kammtail/Series 2 Spiders, 1750/2000 GTVs & GT Juniors and Giulia and Berlina Saloons from about 1968 onwards. Specifications changed at...

Moulded heater hose shaped to suit the earlier heater unit as found in Roundtail Spiders, Sprint GT & GTVs and Giulia Saloons up to about 1968. Specifications changed at different times on different models, so you need to check what your car is...

Silicone bypass hose to suit all 3 outlet waterpump cars from about 1970 through to 1987. Goes from the water pump to the bottom of the inlet manifold underneath the thermostat housing.

Silicone Radiator bottom hose to suit all 105 series cars - including USA spec Bosch injected cars - from 1968 to 1988.

Silicone Radiator bottom hose to suit all 105 series cars up to 1967.

Silicone Radiator top hose to suit all 105 series carburettor cars from about 1968 onwards. This suits all cars with the radiator thermostat located in a separate housing on the inlet manifold. For earlier cars with the thermostat screwed into the inlet...

Silicone radiator top hose with large diameter end to suit all cars with inlet manifolds fitted with screw-in thermostats. See part WA009/S for later cars with thermostats mounted in housings on the inlet manifold. Also fits some 101 Series Veloce cars...

3 outlet water pump to fit carburettored 105 Series cars from 1972 through to 1986 with cable driven tachometers. For later cars with electronic tachometers, use the pump available under item code WA004. Please compare pictures to your water...

2 outlet Water Pump to suit car fitted with alternators (large diameter pulley - 112mm) from 1968 onwards. Kit includes gasket.