105 COUPE PARTS : EXHAUST

Complete exhaust system to suit all GTs and GTVs. Please specify your year, model and engine size of your car in the comments section of the order so that we can ensure that we send you the correct system for your car! Note that for some models the...

A useful kit containing all the items you would normally need to fit a standard exhaust onto a 105 Series car. See also EX036 for the metal plates and inserts for the rubber hangers.

Exhaust manifold nut to suit 101, 105, 116 and 75 engines, including V6. 8 fitted per cylinder head. These are a smaller outer diameter than the original which makes tightening easier as you have more access room around the nut.

Exhaust/inlet manifold stud 34mm to suit all 4 cylinder 101, 105, 116 and 75 engines, including TS. There are 8 on the exhaust side and 7 on the inlet side, of which three are longer and not currently available. Please measure your existing...

Composite cylinder head to exhaust manifold gasket to suit 75 twin spark engine.

Copper exhaust manifold to downpipe gasket to suit all European specification exhaust systems on 105/115 and 106 series cars. Note some US specification cars have a different style 'one piece' gasket which we can get to special order. Please enquire in...

Copper cylinder head to exhaust manifold gasket to suit all 101 and 105 series engines plus 4 cylinder 116 models and 4 cylinder 75 engines (not TS).

Rubber hanger for the exhaust system on all 105/115 series cars. Normally two per car. Also fitted to 750, 101, 102 (2000) and 106 (2600) Series cars. Note. Metal plates and inserts for the rubber hangers are available under item code EX036.

Set of 2 metal plates and the insert for the bolt hole on the rubber exhaust hanger on all 105/115 series cars. Two sets are required for each hanger, usually 4 per car (2 rubber hangers). Also fitted to 750, 101, 102 (2000) and 106 (2600)...

Exhaust tailpipe o-ring for the joint between the centre and rear sections of the exhaust on all 105 series cars

Bracket gearbox - exhaust. For 105 series cars with standing pedals. Length 38mm.

Bracket gearbox - exhaust. For 105 series cars with hanging pedals. Length 32cm.

Bracket gearbox - exhaust. For 105 series cars.

Bush for the gearbox/exhaust hanger bracket that bolts to the gearbox or transaxle on 105, 116 and 75 models. 2 required per car on 105 models and 1 per car on 116 and 75 models.

Front heat insulation/protection plate for early 105 that attaches to the floor above the exhaust system towards the front of the car. Please study pictures carefully including mounting points, to make sure it will fit your car, as we are not sure what...

Middle exhaust heat insulation/protection plate that attaches to the floor above the main central muffler/silencer on all 105 series cars. See item code EX026 for the smaller plate that goes at the front end of the exhaust system. Please note, this...

Front exhaust section to suit all standing pedal 1750cc Spiders, GTVs and Berlinas to 1970. Note that the end of the pipe needs to be cut down by approximately 25 cm to fit Roundtail 1750 Spiders and approximately 24cm to fit 1750 GTVs. For later...

Front exhaust section to suit Duetto 1600 Spiders, Giulia Sedans and Sprint GT/GTVs/GTCs and GT Juniors (and Junior Zagatos) both left hand drive with standing pedals and right hand drive up to 1971. Note that these pipes need to be cut...

Front exhaust section to suit all left hand drive Coupes with hanging pedals and all right hand drive Coupes from 1970 onwards. For earlier cable clutch cars (both left and right hand drive) see item code EX007. For front sections to suit...

Middle exhaust section to suit all Giulia and Berlina saloons through the range to 1978 and all GTs/GTVs up to 1970 with standing pedals, both left and right hand drive. For the equivalent part for GTs & GTVs from 1971 onwards (left hand drive...

Middle exhaust section to suit all LHD & RHD Roundtail Spiders to 1971 with standing pedals. Will also fit Junior Zagatos of the same age range. Made in Italy by IMASAF - OE Quality steel exhaust systems since 1954!

Middle exhaust section to suit all left hand drive GT/GTVs with hanging pedals and all right hand drive GT/GTVs from 1971 onwards. Made in Italy by IMASAF - OE Quality steel exhaust systems since 1954!

Rear exhaust pipe section including muffler and chrome exhaust tip to suit all GTs/GTVs and Giulia saloons up to 1978, both left and right hand drive. Made in Italy by IMASAF - OE Quality steel exhaust systems since 1954!

Rear exhaust pipe section without a silencer/muffler - for a more sporting exhaust note! Made in Italy by IMASAF - OE Quality steel exhaust systems since 1954!