The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

105 COUPE PARTS : CYLINDER HEAD

  • PRODUCTS PER PAGE
  • EX020 EXHAUST/INLET MANIFOLD STUD

    EX020 EXHAUST/INLET MANIFOLD STUD

    Exhaust/inlet manifold stud 34mm to suit all 101 and 105 series twin-cam engines. There are 8 on the exhaust side and 7 on the inlet side, of which three are longer and not currently available. Please measure your existing inlet studs as...

    £1.25
  • EX021 EXHAUST MANIFOLD NUT

    EX021 EXHAUST MANIFOLD NUT

    Exhaust manifold nut to suit 101 and 105 series twin-cam engines. 8 fitted per cylinder head. These are a smaller outer diameter than the original which makes tightening easier as you have more access room around the nut.

    £0.95
  • EN098 OLIO CAP - BLACK PLASTIC

    EN098 OLIO CAP - BLACK PLASTIC

    Black plastic style bayonet fixing Olio cap to suit late Spiders approx 1986 onwards. (note original caps with the cross and serpent logo currently unavailable)

    £26.00
  • EN137 VALVE COVER HOLD DOWN BOLT - CHROME

    EN137 VALVE COVER HOLD DOWN BOLT - CHROME

    Chromed bolt suitable for holding down the cam cover on all twin-cam 101 and 105 series cars. In the original style with the serrated edge and large allen key socket. 6 bolts per car.

    £9.95
  • EN137/1 VALVE COVER HOLD DOWN BOLT - BLACK

    EN137/1 VALVE COVER HOLD DOWN BOLT - BLACK

    Bolt for holding down the cam cover on all twin-cam 101, 105 and also 106 series cars. In the original style with the serrated edge and large allen key socket. 6 bolts per car. Black "rifle" finish.

    £9.95
  • EN139 VALVE COVER HALF MOON SEALS - PAIR

    EN139 VALVE COVER HALF MOON SEALS - PAIR

    A pair of 'half moon' rubber seals for the back of the camshaft housing at the rear of the cylinder head on 101 and 105 Series twin-cam engines.

    £1.95
  • EN140 VALVE/CAM COVER WASHER SET

    EN140 VALVE/CAM COVER WASHER SET

    Set of six 'washers' (four fibre, two aluminium) for the cam/valve cover hold down bolts on all 101 and 105 series twin-cam engines. The same washers are also used on Montreal engines - please enquire in need. Note that the aluminium washers should...

    £5.75
  • EN071 INLET VALVE GUIDE - 101 & 105 SERIES CARS

    EN071 INLET VALVE GUIDE - 101 & 105 SERIES CARS

    Inlet valve guide to fit all 101 and 105 Series engines - including Montreal - with 9mm valve stems. Can also be used as an exhaust valve guide if you wish to fit valve stem seals on the exhaust valves. Sold individually.

    £4.00
  • EN074 VALVE GUIDE STEM SEAL 9mm - 101/105 SERIES

    EN074 VALVE GUIDE STEM SEAL 9mm - 101/105 SERIES

    OE quality valve guide stem seal - to fit the inlet valve guide on all 101 and 105 Series engines with valve guide stem seals. Goetze brand or similar. Also used on the inlet guide on Montreal engines.

    £2.50

Follow Us @classicalfaltd