105 SPIDER PARTS : HOSES & CLAMPS

Moulded heater hose shaped to suit the earlier heater unit as found in Roundtail Spiders, Sprint GT & GTVs and Giulia Saloons up to about 1968. Specifications changed at different times on different models, so you need to check what your car is...

Silicone bypass hose to suit all 3 outlet waterpump cars from about 1970 through to 1987. Goes from the water pump to the bottom of the inlet manifold underneath the thermostat housing.

Silicone Radiator bottom hose to suit all 105 series cars - including USA spec Bosch injected cars - from 1968 to 1988.

Silicone Radiator bottom hose to suit all 105 series cars up to 1967.

Silicone Radiator top hose to suit all 105 series carburettor cars from about 1968 onwards. This suits all cars with the radiator thermostat located in a separate housing on the inlet manifold. For earlier cars with the thermostat screwed into the inlet...

Silicone radiator top hose with large diameter end to suit all cars with inlet manifolds fitted with screw-in thermostats. Also fits some 101 Series Veloce cars with the 'screw in' thermostat housing. See part WA009/S for later cars with thermostats...

Rubber dash vent hose (20 cm long) that fits between the heater unit and the centre dash top vents on all 105 Series Spiders with the later style heater unit from about 1970 onwards. Two used per car.

Radiator overflow piping to suit all 105 series cars. Can also be used for cars with expansion tanks. Price is per metre of tubing.  

Scuttle drain pipe hose to suit all GTs, Spiders 1970-78 and all Saloons. Coupes and Saloons use one hose, Spiders use two. Check your car before ordering as some models up to 1972 still used the grey corrugated pipe which we also sell under...

Moulded rubber scuttle drain hose to suit all late model Spiders 1983-93. Two required per car.  May also be fitted on some late Series 2 Spiders as well.

Grey 'corrugated' scuttle drain pipe hose to suit all GTs, Spiders 1966-83 and all Saloons. Coupes and Saloons use one hose, Spiders use two.

Side air vent hose for all 105 Spiders with 1300/1600 engines from 1966 to 1978 (goes to the back of the round vents).  Two per car.

45mm diameter sprial bound 'paper' heater ducting to suit Roundtail Spiders, Sprint GTs/GTVs and Giulia saloons.  Price is per metre length.

Small sized (13-20mm) stainless steel hose clamp/jubilee clip for general application on heater hoses etc.

Original style "Romablok" hose clamp kit. 1750 cars with alloy T piece.  Please note, some sizes are made by different manufacturers and will differ in color. Some will be gold and some chrome. Please see picture.  Sizes supplied  X8 37-41.5mm X2 30mm X4...

Original style "Romablok" hose clamp kit. Cars with drop in thermostat.  Please note, some sizes are made by different manufacturers and will differ in color. Some will be gold and some chrome. Please see picture.  Sizes supplied X4 37-41.5mm X2 30mm X4...

Original style "Romablok" hose clamp kit. Cars with early screw in thermostat.  Please note, some sizes are made by different manufacturers and will differ in color. Some will be gold and some chrome. Please see picture.  Sizes supplied  X1 52-56.5mm X3...

Original style "Romablok" hose clamp 17-19mm.

Original style "Romablok" hose clamp 52-56.5mm.

Original style "Romablok" hose clamp 37-41.5mm.

Original style "Romablok" hose clamp 30mm.

Original style "Romablok" hose clamp 24-27.5mm.

Original style "Romablok" hose clamp 43-47.5mm.

Large sized (45-60mm) stainless steel hose clamp to suit larger hoses such as the top radiator hose to inlet manifold joint on early 105 series cars.