105 SPIDER PARTS : FUEL TANK SYSTEM

Here is a diagram showing the location of some of the parts in this category.

Fuel tank filler neck hose to suit 105 series Spiders with SPICA injection. Diameter - 58mm

Fuel pump support rubber mount to fit cars with Spica and Bosch Fuel injection, also fuel injected Alfetta and 75 and Montreal models. Also used on the air box on 75 2.0 Twin Spark. part number 14 in the diagram.

In tank fuel lift pump to suit Bosch fuel injected Spiders 1983-93 and fuel injected 75 models (TS and V6). If you require the junction hose between the fuel sender and electric pump, please select following link FL121 CONNECTING HOSE IN TANK FUEL...

Short tapered hose that joins the in-tank fuel pump (FL028/1) with the sender unit on Spiders with Bosch fuel injection and 4 cylinder 75 models with injection.

Spider S4 & late S3 fuel injectors retaining bolt kit

Spider S4 & late S3 fuel feed line to electric fuel pump, which then connects to part FL133 . Item 2 on the diagram picture. E10 Compatible. Included in the kit jubilee clips and a plastic shroud to protect the section of the hose that goes...

Spider S4 & late S3 fuel tank feed hose to electric fuel pump hose. Item 9 on the diagram picture. E10 Compatible.

Fuel tank to suit bosch fuel injected Spiders. Includes extra fittings for fuel return lines and pollution controls. 1986 onwards for Euro market with Bosch fuel Injection 1978 onwards for USA market with SPICA and Bosch injection...

58mm diameter (80mm long) fuel neck hose to fit between the filler neck and the fuel tank. Please check the diameter of your fuel neck before ordering.

45mm diameter (50mm long) fuel neck hose to fit between the filler neck and the fuel tank on Series 2 onwards 2000 Spiders. Please check the diameter of your filler neck before ordering.

Fuel tank to suit all Roundtail Spiders with the correct long straight neck. Please note, if your car is a 1750 or a Junior Kammtail Spider, you will need to purchase this fuel tank and cut the fuel neck to the same height as your existing tank. Please...

Fuel tank to suit Spica fuel injected USA spec Spiders from 1971-78. 

Fuel tank to suit all carburettored Series 2 and Series 3 Spiders from 1970 onwards. Please note, if your car is 1750 or a Junior Kammtail Spider this fuel tank is incorrect. You will need to purchase FL061 and cut the fuel neck to the same hight as your...

Remote fuel flap release cable to suit Series 3 and Series 4 Spiders with the fuel flap release handle (available under item code MI024) fitted in the B pillar.

Spin/screw on fuel filler cap to suit late Series 3 and all Series 4 Spiders. Suits 58mm (approx) diameter filler necks.  

Fuel filler neck seal Spider

New fuel tank sender to fit 2000 Berlina with VEGLIA instruments. Cars with 55 litre fuel tanks and tube measuring between 230-240mm If you have a GTV or Spider with Veglia instruments (not that we have ever seen this!) this will also be the correct...

Fuel sender unit to suit Bosch Spica fuel injected Spiders from 1978 to 1993. As well as any 105 SPICA injected car (excluding Montreals). This new and improved production has the float sensor spaced away from the feed tube so that the fuel pump...

Fuel tank sender gasket to suit all 105/115 series fuel tanks - including late fuel injected cars and Montreals.

New fuel tank sender to fit 2000 GTVs, Saloons and Spiders with the larger fuel tanks and Jaeger instruments. Cars with 55 litre fuel tanks and tube measuring between 230-240mm. Not suitable for fuel injected cars, see part FL030. Includes rubber...

New fuel tank sender to fit all 1300 - 1750 105 Series cars with Jaeger instruments. Includes tank sender gasket.

New fuel tank sender to fit all 1300-1750cc 105 series cars fitted with Veglia instruments. Includes rubber tank gasket.

Non-locking original style Alfa Romeo bayonet fuel/gas filler cap. To fit all 750, 101 and 105 Series cars with bayonet style fuel filler necks from 1955-1972 and GT Junior until 1977. Includes the rubber seal. All 2000 fuel tanks (1972 onwards) use a...