105 SPIDER PARTS : RUBBER

Metal pedal cover plate to fit all left hand drive Spider models with standing pedals.

Front hood/soft top plastic finisher for hood seal to fit all Roundtail Spiders 1966-69

Set of three rubber stoppers for the pedal box on left-hand drive standing pedal 105 series cars 1964-69.

Rubber seal to fit between the pedal housing and the bodywork on all left hand drive 105/115 Series cars with hanging pedals.

1966-69 Spider side window seals 6.

Front hood/soft top seal to fit all Roundtail Spiders 1966-69

Metal channel for the front soft-top seal on all Spiders 1970-93. See item RB027 for the rubber seal.

Soft-top front rubber seal to suit all Spriders 1970-93. Fits in channel (available under code RB028) that is attached to the header rail of the soft-top and seals against the top of the windscreen.

Get the rubber pedal base seal & the metal retaining bracket (to suit all right hand drive 105 series cars with floor hinged pedals) RB066 and RB067 together for a better price!

Metal pedal base seal bracket to retain the rubber seal available under code RB066 on all right hand drive 105 Series cars.  Note that this bracket will require some 'relieving' on the inner left side to fit properly to the car. It's much better that the...

Right hand drive pedal base seal - for all rhd cars from 1964 to 1978. To properly fit the boot, the pedal box must be removed from the car and the pedal shafts removed from the pivot. The boot is fitted by inserting the shaft of the pedal through from...

Rear window hardtop seal to fit Kammtail Spider. Please look at the pictures before ordering, to make sure you are ordering the correct seal.

Rubber seal for the rear edge/base of the factory hardtop for Kammtail Spiders. Please check that the profile resembles your old seal as there is more than one type of hardtop fitted to these cars.

Protective sheath for the door wiring cable on Spiders fitted with electric windows. Inside diameter - 15mm

Rubber seal for the rear edge/base of the factory hardtop for all Roundtail Spiders 1966-69

Rear window hardtop seal to fit Roundtail Spider. See also item RB033 for the side window seals to suit as well. Please look at the pictures before ordering. This seal is for the hardtop with three windows.

Pair of side door window seals to suit a hardtop for a Roundtail (1966-69) Spider. See RB033/1 for a rear window seal for a hardtop as well.

Front rubber seal to fit the original style hardtop on all Kammtail Spiders

Rubber spacer/mounting block for the front bumper to nose panel on Spiders 1986-93. 6 required in total per car.

Front rubber seal to fit the original style hardtop on all Roundtail Spiders 1966-69

Pair of side window seals to fit all hardtops on Spiders 1970-88.

Rubber section that seals around the edge of the radiator aperture in the bodywork on all 105 series GT & GTV, Spider and Saloons from about 1967 onwards where the radiator sits on a rubber support (available under item code WA050) on the front...

Bottom support rubber for all radiators that sit on the front crossmember of the car. Suits GTVs, Spiders and Saloons from 1968 to 1988 and GT Juniors from 1970 onwards.  ONE only required per car.

Pair of rubber sections to fit into the rear bumper over riders on all Roundtail Spiders 1966-70.