GTA RACE & PERFORMANCE PARTS : CLUTCH

FAST ROAD Mechanical/cable clutch kit to suit all cars with mechanical clutches, this replaces the conventional mechanical clutch. Features uprated pressure plate and release bearing and high performance friction plate. ...

Mechanical/cable clutch kit to suit all cars with mechanical clutches, this replaces the conventional mechanical clutch. Features uprated F&S pressure plate and release bearing and high performance friction plate.   Also suitable for GTA 105 and all...

Washer ring to fit all 6 bolt hole cranks as fitted to 105 Series 2000 engines.

As EN531 but drilled to suit 6 bolt crankshaft 2000 engines when fitted into an early pre-1968 car with mechanical clutch and gearbox. Suitable for 220mm ID 105 tooth ring gear (sold separately part number EN084). Designed and developed by...

Spacer plate for bell housing. Please check photo carefully, to make sure this part is correct for your vehicle. This spacer is generally fitted on cars with hydraulic clutch from 1968-1975  

Spacer plate for bell housing. Please check photo carefully, to make sure this part is correct for your vehicle. This spacer is generally fitted on later cars from 1983 onwards.   If you require the starter motor spacer, please see EL068 STARTER MOTOR...

Lightweight billet steel fast road or competition 8 bolt flywheel 200mm, to suit 1300 & 1600 cars, fitted with a 105 tooth ring gear - only 7.3kg total. Fits standard cable clutch cars. Please enquire for more details. Will also fit all...

Lightweight billet steel fast road or competition 8 bolt flywheel, to suit 1300, 1600 & 1750 cars, fitted with a 110 tooth ring gear 215mm - only 7.3kg total. Fits standard hydraulic clutch. Please enquire for more details. Please note,...

Lightweight billet steel competition 6 bolt flywheel to suit 2000 competition engines using early mechanical clutch. 105 tooth ring gear, 200mm driven plate. Also suitable for using a later 6 bolt 1600 crank in an early engine. Weight - 6.3kg

Lightweight billet steel competition 6 bolt flywheel to suit 2000 competition engines, with 130 tooth ring gear fitted - only 7.3kg total. Fits standard hydraulic clutch. Please enquire for more details.

Helix Autosport clutch friction plate to fit hydraulic clutch cars 1968-93. This version is suitable for fast road/trackday use and can be combined with the standard F&S clutch kit CL008 or LUK version CL007.

Bush for the throttle linkage mechanism arm. Also used on the clutch pivot arm on mechanical clutches. 

High performance race-spec clutch with rigid sintered fricton plate and lightweight steel flywheel set to suit cars fitted with mechanical clutch cars. 105 teeth ring gear / 6 bolt crank. Suitable for trackday and competition use. We use...

High performance race-spec clutch with rigid sintered fricton plate and lightweight steel flywheel set to suit cars fitted with mechanical clutch cars. 105 teeth ring gear / 8 bolt crank. Suitable for trackday and competition use. We use...

High performance race-spec clutch with rigid sintered fricton plate and lightweight steel flywheel set to suit 2000 engines with 6 bolt flywheels. Suitable for trackday and competition use. We use this set up in a 190bhp trackday car...