JUNIOR ZAGATO PARTS : BRAKES

BOSCH Brake light switch with spade style connector terminals to suit all RHD 105 series cars and LHD 105 series cars with standing pedals. Will also fit 750 & 101 Series cars as well as some 1900, 102 Series 2000 and 106 Series 2600 cars as well.

Brake light switch to suit left hand drive cars with hanging pedals up to the end of the Series 3 Spider range. Also fits all Alfetta models.

Brake light switch with spade style connector terminals to suit all RHD 105 series cars and LHD 105 series cars with standing pedals. Will also fit 750 101 Series cars as well as some 1900, 102 Series 2000 and 106 Series 2600 cars as well.

Small brake servo overhaul kit containing the vacuum valve and seal to fit the Lockheed brake servo/booster fitted to early 1750 cars with single circuit brakes. For a fill overhaul kit, see item code BR005.

Brake servo repair kit to suit Benditalia / Bonaldi brake servos/boosters. This kit repairs the small vacuum air valve on the bottom of the brake servo unit. One kit per servo. See item code BR006 for the large kit to replace the main diaphragm in the...

Brake Servo repair kit to suit Benditalia / Bonaldi brake servos/boosters. This kit contains the large circular rubber diaphragm and seals for the cylinder. One kit does one servo/booster. See item code BR007 for a repair kit for the vacuum air valve...

Large brake servo/booster overhaul kit to fit the Lockheed brake servo fitted to single brake circuit 1750 models. For a kit just containing the vacuum valve and seal, see item code BR005/1

Original ATE rear axle brake pressure regulator valve. Normally fitted to cars from 1976 to 1984, however it can be fitted on early cars.  Please note, on some models it may require modification to make it fit.

Rear axle brake pressure regulator valve to fit all 105 Series cars. Produced as per original specification with brake switch connection .

Rear axle brake pressure regulator valve to fit all 105 Series cars. This is similar in design to the unit fitted originally to 1990-93 Spiders but will work on all 105/115 models. Also fits 116 models until 1984. Please note, on some models it may...

3 way brake union to fit on the rear axle of all 105 Series cars including Montreals. Alsp fits some 750 and 101 Series cars. This hoses are compatible with 3/8 UNF unions under the code BR323

Front brake disc backing plate right, 1750 2000. Aluminium version - weighs only 177g.

Front brake disc backing plate left, 1750 & 2000. Aluminium version - weighs only 177g.

Front brake disc backing plate left, 1300 1600. Not suitable for 1600 Spiders produced from 1986 to 1993 as these were fitted with the larger front calipers from the 2000 cars, see part BR057. ** NOTE ** - This backing plate will not fit cars...

Front brake disc backing plate right, 1300 1600. Not suitable for 1600 Spiders produced from 1986 to 1993 as these were fitted with the larger front calipers from the 2000 cars, see part BR057. ** NOTE ** - This backing plate will not fit cars...

Front brake disc backing plate left, 1750 2000

Rear brake disc backing plate

Front brake disc backing plate right, 1750 2000

Handbrake shoes Kit - Includes Side cables BR055 & BR056, , X2 short handbrake shoe spring BR094, X2 long handbrake shoe spring BR095, X2 handbrake adjuster mechanism BR076, X4 handbrake shoe retaining spring BR054, X4 handbrake...

BREMBO Handbrake shoes - set of 4 to suit all cars with ATE brake systems 1967 onwards. Fits inside in the 'brake drum' inside the rear brake disc. One set of 4 brake shoes per car.

Handbrake shoes - set of 4 to suit all cars with ATE brake systems 1967 onwards. Fits inside in the 'brake drum' inside the rear brake disc. One set of 4 brake shoes per car.

Clevis pin for the brake master cylinder, all cars with standing pedal. Pedals mounted on the floor. Diameter: 9.4mm Length: 30mm

Clevis pin for handbrake side cable. Used in conjuction with BR055 and BR056 Diameter: 8mm Length: 28.4mm

Handbrake side cable right, to suit all ATE braked cars.