JUNIOR ZAGATO PARTS : OTHER BRAKE PARTS

Full set of brake discs, new ATE fitment calipers (no exchange required), pad pin set, Ferodo pads and all 3 flexi hoses. Front discs include new wheel studs. Rear discs will normally be Brembo but the 1300/1600 fronts have been unavailable from Brembo...

Full set of drilled + grooved sport brake discs, new ATE fitment calipers (no exchange required), pad pin set, Ferodo DS2500 fast road / track day pads and a set of Goodridge braided hoses (which carry a lifetime warranty). Front discs include new wheel...

Big brake conversion kit for 1300/1600 cars (cars fitted with ATE 76mm caliper spacing steering uprights). This fantastic kit comprises lightweight 4 pot calipers etched with our cloverleaf logo, vented 280mm grooved discs with specially machined...

Keeping your brakes and calipers well-lubricated allows them to operate at peak performance for a smooth ride that is free from excess Noise, Vibration and Harshness. Apec brake grease is formulated from a copper-free lubricant that assists in the smooth...

ATE brake cylinder paste is used for repair, assembly and conservation of hydraulic brake components, It is applied thinly and evenly to cylinder sleeves, pistons and seals. (Assembly of Brake calipers, Master cylinder etc). - ATE brake cylinder...

Non-return valve for the servo as fitted to cars with hamging pedals.

Brake pad retaining pin/spring set to fit the rear brake calipers on all ATE braked 105 Series cars. Kit is for both rear calipers.

Brake pad retaining pin/spring set for 1300/1600 model front ATE brakes on 105 series cars plus some 116 models of all engine sizes. Kit is for both front calipers.

Classic Alfa production of the reservoir clip fitted to all right hand drive 105 Series cars 1968 onwards and left hand drive cars 1968-70 with hydraulic clutch and single circuit brakes. If you require the reservoir, please see BR085 BRAKE...

Pair Front brake flexi hose bracket. To fit all 105 Series cars Montreals. NOT SUITABLE FOR DUNLOP BRAKES

New production of the later ATE brake fluid reservoir outer cap. 

Front LEFT brake flexi hose bracket. To fit all 105 Series cars & Montreals. NOT SUITABLE FOR DUNLOP BRAKES

Late style rectangular brake fluid reservoir Suitable for the following cars: RHD 105 Series cars - 1968 onwards LHD 105 Series cars - 1968-70 (with hydraulic clutch and single circuit brakes) On early single circuit cars with one brake servo,...

Goodridge braided brake line set (complete car set – 3 pieces). These stainless steel brake flexi hoses will improve the pedal feel and are guaranteed for life. This version is approved by the German TUV authorities and therefore suitable for the...

Brake flexi hose suitable for the following vehicles: All 105 series cars including Montreals (rear brake hose) All 750/101 series cars (rear brake hose) 2600 (106) cars (hydraulic clutch hose) ONE PER CAR! These hoses are compatible with 3/8...

Brake flexi hose to fit the front brake system (between brake lines and calipers/drums). Suitable for the following vehicles: All 105 Series cars (including Montreals) All 750/101 Series cars All 106 (2600) Series cars These hoses are compatible...

Cupro-nickel short front brake pipe from the flexible line to the brake caliper on ATE braked cars from 1968-93 with large front calipers (1750+2000 models) including Montreals. If you require copper see BR070.

1300cc and 1600cc 105 Series cars are fitted with smaller front ATE brake calipers from 1968 to 1978. This cupro nickel brake pipe fits from the front flexible line onto the smaller front ATE caliper on these models. Two pipes required per car...

1300cc and 1600cc 105 Series cars are fitted with smaller front ATE brake calipers from 1968 to 1978. This copper brake pipe fits from the front flexible line onto the smaller front ATE caliper on these models. Two pipes required per car - one...

Short copper front brake pipe from the flexible line to the brake caliper on ATE braked cars from 1968-93 with large front calipers (1750+2000 models) including Montreals.

Bleed screw cap. Will fit all bleed screws.  

Brake disc/drum retaining screw.

Rubber plug brake master cylinder, 15mm diameter. Used to connect the reservoir to the master cylinder.

Rubber plug brake master cylinder, 20mm diameter. Used to connect the reservoir to the master cylinder.