JUNIOR ZAGATO PARTS : BRAKES

Full set of brake discs, new ATE fitment calipers (no exchange required), pad pin set, Ferodo pads and all 3 flexi hoses. Front discs include new wheel studs. Rear discs will normally be Brembo but the 1300/1600 fronts have been unavailable from Brembo...

Full set of drilled + grooved sport brake discs, new ATE fitment calipers (no exchange required), pad pin set, Ferodo DS2500 fast road / track day pads and a set of Goodridge braided hoses (which carry a lifetime warranty). Front discs include new wheel...

Big brake conversion kit for 1300/1600 cars (cars fitted with ATE 76mm caliper spacing steering uprights). This fantastic kit comprises lightweight 4 pot calipers etched with our cloverleaf logo, vented 280mm grooved discs with specially machined...

Set of high performance racing Ferodo DS3000 pads to suit our big brake conversion kits available under item codes BR200 and BR201. Height - 51mm Width - 113mm

Set of high performance Ferodo DS2500 brake pads to suit the Big Brake conversion kits available under item codes BR200 (1750/2000 cars) and BR201 (1300/1600 cars) For the race version in DS3000 please go to the Race / Performance parts section of...

Give Your brakes the highest possible guarantee with the NEW Brembo B-Quiet lubricant. B-Quiet is a new Brembo lubricant which provides long term high load capacity and reliability for your braking system.The brake...

ATE brake cylinder paste is used for repair, assembly and conservation of hydraulic brake components, It is applied thinly and evenly to cylinder sleeves, pistons and seals. (Assembly of Brake calipers, Master cylinder etc). - ATE brake...

The main handbrake cable from the handle to the pivot on the differential to fit all Spiders with ATE brakes 1967 to 1993. Also fits Junior Zagato.

Ferodo DS3000 - full race rear pads (not suitable for road use) Height - 53mm Width - 55mm Mounting holes center to center - 36mm

Ferodo DS3000 - full race 1300/1600 front pads (not suitable for road use) Height - 56mm Width - 61mm Mounting holes center to center - 45mm

Set of Ferodo rear brake pads to fit all ATE braked 105 Series cars.

Set of front brake pads to fit all ATE braked 1300 and 1600 cc cars with the smaller front brake calipers. See BR021 for the equivalent part for cars with larger (1750/2000) brake calipers. Note that most 1.6 Spider Juniors from 1985 onwards and some...

Brake pad retaining pin/spring set to fit the rear brake calipers on all ATE braked 105 Series cars. Kit is for both rear calipers.

Brake pad retaining pin/spring set for 1300/1600 model front ATE brakes. Kit is for both front calipers.

Ferodo DS2500 - fast road/track day rear pads. For the race version in DS3000 please go to the Race / Performance parts section of the website. Height - 53mm Width - 55mm Mounting holes center to center - 36mm

Set of Ferodo DS2500 front brake pads to suit small front calipers (1300 & 1600 style). Ideal for fast road/track day cars. For the race version in DS3000 please go to the Race / Performance parts section of the website. Height -...

New production of the later ATE brake fluid reservoir outer cap.

Front brake flexi hose bracket. To fit all 105 Series cars Montreals. NOT SUITABLE FOR DUNLOP BRAKES

New production of the later rectangular brake fluid reservoir fitted to all right hand drive 105 Series cars 1968 onwards and left hand drive cars 1968-70 with hydraulic clutch and single circuit brakes. Does not include the small filter inside the neck...

Goodridge braided brake line set (complete car set – 3 pieces). These stainless steel brake flexi hoses will improve the pedal feel and are guaranteed for life. This version is approved by the German TUV authorities and therefore suitable for the...

Brake flexi hose for the rear of all 105 series cars including Montreals, as well as 750 and 101 Series cars. Goes from the body to the rear axle.

Brake flexi hose to fit the front brake system (between brake lines and calipers/drums) on all 105 Series cars including Montreals, as well as 750, 101 and 106 (2600) Series cars.

Cupro-nickel short front brake pipe from the flexible line to the brake caliper on ATE braked cars from 1968-93 with large front calipers (1750+2000 models) including Montreals. If you require copper see BR070.

1300cc and 1600cc 105 Series cars are fitted with smaller front ATE brake calipers from 1968 to 1978. This cupro nickel brake pipe fits from the front flexible line onto the smaller front ATE caliper on these models. Two pipes required per...