JUNIOR ZAGATO PARTS : BRAKES

Full set of brake discs, new ATE fitment calipers (no exchange required), pad pin set, Ferodo pads and all 3 flexi hoses. Front discs include new wheel studs. Rear discs will normally be Brembo but the 1300/1600 fronts have been unavailable from Brembo...

Full set of drilled + grooved sport brake discs, new ATE fitment calipers (no exchange required), pad pin set, Ferodo DS2500 fast road / track day pads and a set of Goodridge braided hoses (which carry a lifetime warranty). Front discs include new wheel...

Big brake conversion kit for 1300/1600 cars (cars fitted with ATE 76mm caliper spacing steering uprights). This fantastic kit comprises lightweight 4 pot calipers etched with our cloverleaf logo, vented 280mm grooved discs with specially machined...

Set of high performance racing Ferodo DS3000 pads to suit our big brake conversion kits available under item codes BR200 and BR201. Height - 51mm Width - 113mm  

Set of high performance Ferodo DS2500 brake pads to suit the Big Brake conversion kits available under item codes BR200 (1750/2000 cars) and BR201 (1300/1600 cars) For the race version in DS3000 please go to the Race / Performance parts section of the...

 Give Your brakes the highest possible guarantee with the NEW Brembo B-Quiet lubricant. B-Quiet is a new Brembo lubricant which provides long term high load capacity and reliability for your braking system.The brake lubricant should be applied where the...

  ATE brake cylinder paste is used for repair, assembly and conservation of hydraulic brake components, It is applied thinly and evenly to cylinder sleeves, pistons and seals. (Assembly of Brake calipers, Master cylinder etc). - ATE brake cylinder paste...

The main handbrake cable from the handle to the pivot on the differential to fit all Spiders with ATE brakes 1967 to 1993. Also fits Junior Zagato.

Ferodo DS3000 - full race rear pads (not suitable for road use) Height - 53mm Width - 55mm Mounting holes center to center - 36mm

Ferodo DS3000 - full race front pads for 1300/1600 105 series models plus some 116 models of any engine size. Not suitable for road use. Height - 56mm Width - 61mm Mounting holes center to center - 45mm

Set of Ferodo rear brake pads to fit all ATE braked 105 Series cars.

Set of front brake pads to fit all ATE braked 1300 and 1600 cc cars with the smaller front brake calipers plus some 116 models of any engine size. See BR021 for the equivalent part for cars with larger (1750/2000) brake calipers. Note that most 1.6...

Brake pad retaining pin/spring set to fit the rear brake calipers on all ATE braked 105 Series cars. Kit is for both rear calipers.

Brake pad retaining pin/spring set for 1300/1600 model front ATE brakes on 105 series cars plus some 116 models of all engine sizes. Kit is for both front calipers.

Ferodo DS2500 - fast road/track day rear pads. For the race version in DS3000 please go to the Race / Performance parts section of the website.   Height - 53mm   Width - 55mm   Mounting holes center to center - 36mm  

Set of Ferodo DS2500 front brake pads to suit small front calipers  fitted to 105 1300 & 1600 cars plus some 116 models of any engine size. Ideal for fast road/track day cars. For the race version in DS3000 please go to the Race / Performance parts...

Classic Alfa production of the reservoir clip fitted to all right hand drive 105 Series cars 1968 onwards and left hand drive cars 1968-70 with hydraulic clutch and single circuit brakes. If you require the reservoir, please see BR085 BRAKE...

Front RIGHT brake flexi hose bracket. To fit all 105 Series cars & Montreals. NOT SUITABLE FOR DUNLOP BRAKES

New production of the later ATE brake fluid reservoir outer cap. 

Front LEFT brake flexi hose bracket. To fit all 105 Series cars & Montreals. NOT SUITABLE FOR DUNLOP BRAKES

New production of the later rectangular brake fluid reservoir fitted to all right hand drive 105 Series cars 1968 onwards and left hand drive cars 1968-70 with hydraulic clutch and single circuit brakes. Does not include the small filter inside the neck...

Goodridge braided brake line set (complete car set – 3 pieces). These stainless steel brake flexi hoses will improve the pedal feel and are guaranteed for life. This version is approved by the German TUV authorities and therefore suitable for the...

Brake flexi hose for the rear of all 105 series cars including Montreals, as well as 750 and 101 Series cars. Goes from the body to the rear axle. ONE PER CAR! Will also fit the hydraulic clutch hose on 2600 (106) cars. These hoses are compatible...

Brake flexi hose to fit the front brake system (between brake lines and calipers/drums) on all 105 Series cars including Montreals, as well as 750, 101 and 106 (2600) Series cars. These hoses are compatible with 3/8 UNF unions under the code BR322