JUNIOR ZAGATO PARTS : FRONT SUSPENSION & STEERING

Left hand drive ( steering on the left sitting in the car) CNC manufactured replacement steering box. Original Burman steering box cases are renowned for cracking. Made from a solid piece of 6061 grade aluminium, which makes the case extremely...

Steering box casing for LHD late Burman steering boxes. Please compare to your existing casing before purchasing. ** NOTE ** - The threaded holes in these new cases have been changed from the original UNC thread to M8 x 1.25.

Steering box case, for early LHD Burman steering boxes. This has the extra point at the base for the linkage attachment for cars with column gear change. we understand this type of case was also used on early cars with floor gear change. Please...

Gasket set for Burman steering box, for both left and right hand drive cars.

Steering idler repair kit

New metal cap and clamp to fit on all original steering idler boxes, both left and right hand drive. ** NOTE ** - This does not fit on the new roller bearing idler boxes available under code SU079/1.

Steering column woodruff key, will fit all 105 series cars. Length - 18.7mm Width - 4.78mm Height - 7.95mm

Steering wheel nut, will fit all 105 series cars.

Steering wheel nut locking tab, will fit all 105 series cars.

Bottom oil seal to suit all ZF steering boxes.

Bottom oil seal to fit Burman steering boxes, both left and right hand drive.

105 series suspension ball joint kit - Includes a pair of lower ball joints, castor arm ball joints & adjustable top suspension arms.

105 series suspension ball joint kit - Includes a pair of lower ball joints, castor arm ball joints & top suspension arms.

Castor arm rod to fit all 105 Series Coupes, Saloons and Spiders.  

Castor arm ball joint to fit all 105 Series Coupes, Saloons, Spiders and Montreals.  

Top suspension arm - right side looking from the rear of the card. Includes bushes and ball joint. See item code SU027 for the same part for the left side of the car and SU031 and SU032 for adjustable versions. We recommend...

Top suspension arm - left side looking from the rear of the car. Includes bushes and ball joint. See item code SU028 for the same part for the right side of the car and SU031 and SU032 for adjustable versions. We recommend...

Top quality (Wurth brand) Nylock nut to fit the bottom ball joint bolts and also the propshaft rubber couplings on all 105 Series cars. Sold individually. 4 per car for the ball joints and 6 per car for the propshaft coupling.

Front suspension bottom ball joint to fit all 105 Series Coupes, Saloons, Spiders and Montreals. As this component has a very hard life in a 105 Alfa we have tested all the brands on the market (of Asian, Turkish & Italian origin) and have found these...

Adjustable top suspension arm as fitted to GTAs - right side of car (looking from the rear). Allows camber angles to be adjusted for competition use. When fitting these arms to your car, we recommend that you replace the rubber...

Adjustable top suspension arm as fitted to GTAs - left side of car. Allows camber angles to be adjusted for competition use. When fitting these arms to your car, we recommend that you replace the rubber bushes supplied with our...

OE Quality front wheel bearing kit to fit 750, 101 and 105 Series cars. Includes inner and outer bearings, oil seal. Also suitable for 1900 ** NOTE ** - We will supply either FAG or SKF as supply can be sporadic for both brands.

Front wheel bearing kit to fit 750, 101 and 105 Series cars. Includes inner and outer bearings and oil seal.

Front wheel stub axle/hub washer. To suit all 105 Series cars.