MONTREAL PARTS : OTHER BRAKE PARTS

Steel spring clip to fit the dust seals on the 48mm diameter piston ATE front brake calipers fitted to all ATE braked 105 series cars and some 116 and 75 models. Should be used in conjunction with the kits available under item code BR035 or BR081. 2...

Rebuild kit to suit all rear ATE brake calipers, including new pistons and seals. With a piston diameter of 38mm this kit will suit all ATE rear calipers from 1967 onward. Note that the pistons are cup shaped and do not have the original-style central...

Rebuild kit for both front ATE brake calipers, including new pistons and seals. With a piston diameter of 48mm this kit will suit both 1300/1600 (smaller) and 1750/2000 (large) ATE front calipers from 1967 onward. This kit will do both front calipers...

BREMBO Brake master cylinder 22mm - for all LHD cars with hanging pedals, 1970 onwards and RHD Spiders from 1984-93. Also fits post 1973 Montreals - LHD and RHD and all Alfetta transaxle cars (116 series). if you require the unions, please click on...

Brake master cylinder repair kit to suit left hand drive ATE 22mm master cylinders, usually found on left hand drive 105 series cars 1970-93 and later (post 1973) Montreals. Also fitted on RHD conversion Spiders from 1978 to 1993.

Brake master cylinder repair kit to suit left hand drive ATE 20mm master cylinders, usually found on early (1970-72) left hand drive hanging pedals 105 series cars inc. Montreals. For more common 22mm repair kit please see part BR011/2.

Brake servo vacuum hose to fit all 105 Series cars with brake servos. RHD dual brake circuit cars and LHD dual circuit 1750s with standing pedals require two hoses. Can also be fitted on 2.0 116 cars. Please see WA071 for the correct sized jubilee...

New brake servo to fit all left hand drive cars 105 Series cars with hanging pedals, 1970 onwards, including Montreals.

Brake light switch to suit left hand drive cars with hanging pedals up to the end of the Series 3 Spider range.

3 way brake union to fit on the rear axle of all 105 Series cars including Montreals. Alsp fits some 750 and 101 Series cars. This hoses are compatible with 3/8 UNF unions under the code BR323

Brake / clutch pedal rubber with logo to suit all 105 Series cars. Although not original, the logo is a nice touch and reminiscent of the earlier Giulietta cars which did have this. Soften it in warm water before attempting to fit - you will find it much...

Brake and clutch pedal rubber to suit all 105 Series cars. Soften it in warm water before attempting to fit -you will find it much easier that way!

Copper-Nickel brake line set to suit left hand drive - except for the front pipes to the brake calipers and the main feed lines from the fluid reservoir to the master cylinder. Made in the UK to all the correct dimensions with correct end fittings to...

Brass male brake union - 3/8 UNF thread - to suit the braking system on all 105 series cars except for the caliper fittings. See item code BR321 for the union to fit into ATE brake calipers.  

Brass female brake union - 3/8 UNF thread - to suit the braking system on all 105 Series cars.

Brass brake union (male) M10 x 1 thread. This fits into the ATE calipers on all cars from 1968 onwards. Note that the remainder of the braking system uses 3/8 UNF threads.

Fantastic tool for straightening new brake lines to fit onto all Alfas - as well as other lesser marques. Allows you to create dead straight pipe runs for a factory finish look. For 3/16" pipe. Other versions available to order. To see how it works -...

Useful tool for bending new brake lines to fit onto all Alfas - as well as other lesser marques.  

Brembo DOT 4 brake and clutch hydraulic fluid. 0.5 (500ml) litre container.

Brembo DOT 4 brake and clutch hydraulic fluid. 1 litre container.

Developed for the US Military, silicone brake fluid (DOT 5) is the most advanced brake and clutch fluid ever devised. Never needs replacing, non hygroscopic, doesn't damage paintwork and boiling point of 260 degrees C (500 deg F). Compatible with the...

High performance Brembo dot 5.1 brake and clutch hydraulic fluid - high boiling point suitable for both road and competition purposes. See BR090 for 1 litre containers.

High performance Brembo dot 5.1 brake and clutch hydraulic fluid. High boiling point and suitable for both road and competition use. 1 litre container, see code BR091 for 500 mL version.