105 COUPE PARTS : FILTERS

Metal strap to fit the tubular air filter canister fitted to 105 Series cars from about 1970 to 1986 plus some 116 models.

Metal strap for the air filter housing on early 105 series cars with the air filter on the exhaust side. 

Air filter to fit the single carb FISPA cannister setup mainly found on early 105 Series Giulia Saloons. Dimensions: Height - 11cm Outer Diameter - 13cm Internal Diameter - 9cm

Air filter to fit the single carb FRAM cannister setup mainly found on early 105 Series Giulia Saloons. Dimensions: Height - 13.5cm Outer Diameter - 16cm / 18.5cm Inner Diameter - 11cm

Sport Air filter for better less restrictive induction. To fit the cannister on the early 'crossover' intake as seen on cars up to 1970 (105.26 early type). New production to our own specification, fits much more tightly into both styles of...

Sport Air filter for better less restrictive induction. For cars with cylindrical Air filter - later type (105.48) - to suit later 105s with the filter on the carb side plus some 116 models. Please check measurements before...

Cylindrical Air filter - later type (105.48) - to suit later 105s with the filter on the carb side plus some 116 models. Please check measurements before ordering! Dimensions: Length - 41cm Diameter - 12cm

Late style tubular air filter, as normally fitted to carburettored S3 Spiders and some 116 models. Please check the measurement of your old filter! Dimensions: Length - 35cm Diameter - 12cm (tapering to 11cm)

Air filter to fit the cannister on the early 'crossover' intake as seen on cars up to 1970 (105.26 early type) New production to our own specification, fits much more tightly into both styles of early 105 Series 'cross over' air filter housings,...

Rubber 'crossover' trunking to suit early air filter set-up on 105 series cars. Also fits 1600 SS and 101 1600 Spider Veloce. Please see EN116 for the original style fitting clips.

Pair of air filters to fit the intake system of US specification SPICA mechanical fuel injection 4 cylinder cars. Dimensions: Length - 185mm Diameter - 90mm

Period rampipes - reproduction of the style used on GTA Corsa cars in period. The trumpets can be set at any angle you wish to alter the ram effect of the air intake. Can be used in conjunction with the filter socks available under item code FL049. This...

Fixing tab rampipe 40 DCOE. 4 required per carburettor. 

Fixing tab rampipe 45 DCOE. 4 required per carburettor. 

Pair of 70mm mesh filters to fit over the Weber 48mm DCOE rampipes. Two pairs required per car.

Pipercross filter socks - set of 4 for those with GTA style intake trumpets fitted or similar rampipes.

Pipercross 40 DCOE rampipes set - sold as a set of 4 only. Will fit Weber, Dellorto and Solex carbs fitted to 105 series Alfas. Depth -30mm

Pair of Pipercross kk300 air filters - inc. mounting plates. No rampipes necessary. ** NOTE ** - the backplate may need some easy trimming to make it fit some engines.

Pipercross kk600 air filter - including mounting plate. Fixes directly over both carbs. Greatly improved induction, can be teamed with rampipes available under code FL045 for best effect. ** NOTE ** - This is not suitable for 1300 engines in...

Pair of K+N 'pancake style' performance air filters to suit all sidedraught twin carburettor Alfas. Chrome plated bodies and long-life filter elements and all fittings included. Not suitable for 1300 engines. 

Pair of 56mm mesh filters, to suit rampipes fitted to 40 DCOE carburettors. 

Pair of 63mm mesh filters to suit rampipes fitted to 45 DCOE weber carburettors. Will  fit on the rampipes supplied with new 45 DCOE carburettors. One set per carburettor.

Specially made venturi for our ram pipe FL067. It has a narrower outer diameter to allow the sleeve of the ram pipe to fit. 4 required per car.

Specially made spun aluminium rampipe to suit 40mm DCOE Weber carburettors that sleeve into the carburettor. Has a 63mm diameter bellmouth. Other depths available include 16mm, 39mm, 55mm and 75mm. You will need FL067/1 venturis for these to fit.