105 COUPE PARTS : RUBBER

Metal pedal cover plate to fit all left hand drive GT, GTV and GTA models with standing pedals.  

Rubber seal to fit between the pedal housing and the bodywork on all left hand drive 105/115 Series cars with hanging pedals.

Get the rubber pedal base seal & the metal retaining bracket (to suit all right hand drive 105 series cars with floor hinged pedals) RB066 and RB067 together for a better price!

Metal pedal base seal bracket to retain the rubber seal available under code RB066 on all right hand drive 105 Series cars.  Note that this bracket will require some 'relieving' on the inner left side to fit properly to the car. It's much better that the...

Right hand drive pedal base seal - for all rhd cars from 1964 to 1978. To properly fit the boot, the pedal box must be removed from the car and the pedal shafts removed from the pivot. The boot is fitted by inserting the shaft of the pedal through from...

Rubber section that seals around the edge of the radiator aperture in the bodywork on all 105 series GT & GTV, Spider and Saloons from about 1967 onwards where the radiator sits on a rubber support (available under item code WA050) on the front...

Bottom support rubber for all radiators that sit on the front crossmember of the car. Suits GTVs, Spiders and Saloons from 1968 to 1988 and GT Juniors from 1970 onwards.  ONE only required per car.

Rubber 'H' section edging for the front wheel splash panels on all GTs and GTVs 1963-76. Ideal if you wish to keep the original splash panels on the car, but to make sure they seal correctly, you need this set of rubbers!

Bush for the throttle linkage mechanism where it pivots on the firewall/bulkhead. Two required per car.

Right main door rubber seal to fit all 105 series GTs, GTVs, GTAs. Thinner profile softer style rubber (made in Italy) - the best available! we have tested every door seal on the market on a totally original unrestored 21,000 mile car and with...

Left main door rubber seal to fit all 105 series GTs, GTVs, GTAs. Thinner profile softer style rubber (made in Italy) - the best available! We have tested every door seal on the market on a totally original unrestored 21,000 mile car and with this...

Bertone GT (1964-78) reversing light rubber wiring cover. 1 per car. These are also suitable for the rear light units for all 750, 101, 102 (2000 touring) 106 (2600 touring) cars. 3 pieces required per light for these models.

Set of 8 rubber door bungs to fit all GTs, GTVs & GTCs to fill in the holes in the door frame - four used per door.

Door rubber channel set (for retaining main door seals) for all GTs, GTVs, GTAs & GTCs. Remade in anodised aluminum so they won't rust away like the originals! Complete 10 piece car set.

Pair of rear numberplate light seals to suit 101 Series Spiders. Light units available separately under code 750-311 or 750-311/1 (non Carello version). Can also be used on the same light units fitted to all 105 Series GT/GTVs up to the 1750 Mk 1, early...

Front quarterlight / quarter window rubber seal to fit all 105 series GT, GTV, GTA & GTC cars - right hand side. 

Front Quarterlight/quarterwindow rubber seal to fit all 105 series GT, GTV, GTA & GTC cars - left hand side. 

Rubber seal for the quarterlight glass hinge. Fitted on all models of GT, GTV and Giulia/Berlina saloons.

Rubber seal/end guide for the top of the right side quarterlight window frame on all models of GT & GTV. Finishes off the top end of the vertical window channel where the door glass goes up and down.

Rubber seal/end guide for the top of the left side quarterlight window frame on all models of GT & GTV. Finishes off the top end of the vertical window channel where the door glass goes up and down.

Front of door rain seal to fit all models of GT, GTV & GTC - for right side door.

Front of door rain seal to fit all models of GT, GTV & GTC - for left side door.

Small rubber seal that sits at the front end of the Quarterlight surround on all 105 series Coupes where it fits into the door frame. See RB041 for the same part for the left side of the car

Small rubber seal that sits at the front end of the Quarterlight surround on all 105 series Coupes where it fits into the door frame. See RB041/1 for the same part for the right side of the car.