105 SALOON PARTS : RUBBER

Here is a diagram showing the location of some of the parts in this category.

Here is a diagram showing the location of some of the parts in this category.

Headlight seal to fit all 105 Series Spiders 1966 - 93 without perspex headlight covers - such as Spider Junior and all USA models. Cars fitted with covers do not use a seal. Also fits early GT (1964-67), early Giulia saloon, 2600 Sprint, 2000/2600...

Headlight seal to suit the inner headlights on 1750 2000 GTVs and Mk 1 1750 Berlinas and all the headlights on later Berlina saloons. Can also be used on inner headlamps on Giulia Saloons.

Headlight lens to bowl seal to fit 7 inch headlights on all non-Stepfront GTs/GTVs and Saloons. Can also be used on Stepfront GTs as a replacement for the original lens to bowl seal

Pair of headlight wiring grommets to fit into the rear of the headlight bowl on all 105 Series Spiders 1966-93 and all Step-front GTs. Can also be used in the outer headlight bowls on some 1750 2000 GTVs, GT Juniors and all Saloons. Suitable for...

Front windscreen seal to suit Giulia/Berlina saloons.

Pair of front quarterlight seals to fit all Giulia and Berlina saloons.

Rear screen rubber to suit all versions of the Giulia saloon.

Rear screen rubber to suit 1750 and 2000 Berlina saloons.

Vertical door glass channel felt to fit around the door drop glass. Sold by the metre.

Horizontal door window scraper felt that fits all saloons (Super / Berlina / Ti etc.) from 1962-77. It differs from the GT / Spider one as it has a metal strip running through it and is therefore rigid and supplied in lengths of approx. 70cm to allow it...

Pair (left and right) of front sidelight to bumper seals to fit Mk 1 1750 GTVs and Berlinas.

Pair of rubber electric cable boots to fit inside the front wing/fender where the wires connect to the 'long' style side repeators fitted to Step-front GTs and GTAs and Giulia Saloons.

Rubber seal/flap that fits across the rear of the engine bay on the early Giulia saloons.

Rubber seal/flap that fits across the rear of the engine bay on Giulia saloons.

Giulia saloon boot lock rubber seal gasket/grommet.

Classic Alfa production of the steering column grommet for most right hand drive 105 Series GT/GTVs, Saloons and Spiders. Previously unavailable for many years, this part has been in great demand by all 105 series restorers. Some later cars (1973...

Rubber and metal screw in bonnet/hood stop for all Giulia saloons. Two required per car.

Rubber strip for the bumper over-riders on 1750 GTV Mk 2, 2000 GTV and some saloons. Goes between the over-rider and the main bumper. Sold per length to suit one over-rider, 4 required per car.

Classic Alfa Production - The firewall/bulkhead cable grommet for speedo/tacho and the choke cables on all right hand drive Saloons, Spiders and GTs/GTVs. This grommet always needs renewing and was out of production and unavailable for over 20...

Rubber grommet for the firewall to suit left hand drive Spiders (and possibly Coupes Saloons) up to 1969. It is for the choke cable and hand throttle cable on these cars. Also fits most 116 models.

Over-rider rubber to fit 1750 GTV Mk 2, 2000 GTV and some saloon models. 4 required per car.

Rubber grommet for where the steering column passes through the firewall on left hand drive 105 series cars up to 1970 with standing pedals.