105 SALOON PARTS : FILTERS

Gasket for the tachometer drive to water pump.

Timing cover "O" ring. Please see pictures for fitting location.

Gasket for the early cartridge style oil filter housing,where it mounts on to the engine block.

Oil filter - early cartridge style as used on 750/101/102 and 105 series 1300, 1600 1750 engines up to about 1972. See item code EN047 for the later style spin on oil filter used on 2000 engines and later 1300 1600 motors. This filter comes...

Spin-on style oil filter to suit 105 series engines from about 1972 onwards. Ideal for all 2000 engines and later 1600 motors - high quality, direct alternative for original sized Alfa oil filters made by the O/E manufacturer for Ferrari (UFI)...

Spin-on style oil filter to suit twin-cam engines from 1972 onwards. Original branded filter now produced in a smaller size to suit more modern engine bays with restricted space/access. Good for Series 4 Spiders where access can be difficult. We also...

Metal air hose clamp to suit 750, 101, early 105, 102, 106 series cars. Can be bent to suit various sizes / applications.

Main engine bay fuel filter for Montreals and all 4 cylinder USA Spica injected cars. Also available as part of a set of Montreal fuel filters - see item code MN100.

Air filter housing fitted to all early 105 cars with crossover air hose.

Fits our battery clamp set and also the air filter housing of 105 series cars with the long air filter on the carb side.

Gasket to fit the crossover style aluminium air filter housing fitted to all twin carburettor 105 Series cars 1300 to 1750 up to 1969. Fits between the lid and the body of the housing that bolts to the carburettors.

Gasket to fit between the air intake trough/plenum and the carburettor body on all carburettored 105 series cars fitted with side draught carburettors.

Rubber gasket filter for aluminium trough to air filter canister ('68-'78)

Fuel filter element - larger size, fits into the metal housing found on some later carburetted cars (1975 to 1986) as well as the Filter King fuel filter unit available under code FL053. Size 4cm tall/long by 4 cm diameter.

Fuel filter element small - Fispa type fits in small glass bowl as used on most Alfas from late 1950s until 1975. Includes spring. 4 cm long/tall and 3.3 cm diameter. For the seal between glass bowl and unit order FL078.

Filter king fuel filter rubber seal.

Filter king fuel filter regulator with glass bowl

Support bracket for the early style 'crossover' plenum. Please see pictures

Curved oil breather hose from the cam cover to the air filter canister on many of the 105 series cars. Note that this fits both the early style 'crossover' air-cleaner setups as well as the later tubular style air-cleaners.

Hot air ducting tube (60mm diameter) to suit all 105 series cars from 1970 on with the 'warm air' intake panel located on the side of the engine block. This tube goes from the air cleaner to the plate.

Metal strap to fit the tubular air filter canister fitted to 105 Series cars from about 1970 to 1986.

Air filter to fit the single carb FISPA cannister setup mainly found on early 105 Series Giulia Saloons. H11cm D13cm ID9cm

Air filter to fit the single carb FRAM cannister setup mainly found on early 105 Series Giulia Saloons. H13.5cm D16cm & 18.5 ID11cm

High performance K N air filter for late air filter canisters on cars from 1969 to 1978. No need to ever replace it - just clean it and re-use. K N's air filters are designed to increase horsepower and acceleration while providing excellent...