105 SALOON PARTS : USED PARTS

Used intake manifold to suit Late 105 cars with a drop in thermostat, this will fit 1600, 1750 2000 engines. This manifold is used but is in great condition and fully functional. As you can see from the photos, the previous owner has beveled the...

Used cam cover to suit, 105 series mk2 1750 2000 cars with the two bolt holes on the front edge of the cam cover.

Used stainless steel hubcap, with small diameter trim ring. This hubcap will fit early 15" steel wheels with spring clips. To suit Sprint GT, GTC and early Giulia saloons from 1964-66. Please see the photos for condition, the ring has some...

Used, original Bosch distributor cover to suit 105/115 Series cars. This cover is in very good condition for it age, please check the shape of your distributor against our photos to ensure the correct fit.

Used original 4.5x15 inch wheel to suit an early Super, this wheel is in generally good condition for its age other than some light surface rust and a small dent to the leading edge.

Used, original vapour blasted intake manifold to suit 101 series 1600 Giulietta's and some early 105 series cars with a single carb. This manifold has no corrosion at all, however there is some pitting to the casting and some of the studs...

Used, original vapour blasted intake manifold to suit 101 series 1600 Giulietta's and some early 105 series cars with a single carb. This manifold is in great condition with no corrosion at all, some of the studs and fittings may want...

Used, original vapour blasted intake manifold to suit 101 series 1600 Giulietta's and some early 105 series cars with a single carb. This manifold is in great condition with no corrosion at all, some of the studs and fittings may want...

Used cam cover to suit, 105 series mk2 1750 2000 cars with the two bolt holes on the front edge of the cam cover. This cover may want sanding and re painting for best results. Sold as seen in the photos.

Used cam cover to suit, 105 series mk2 1750 2000 cars with the two bolt holes on the front edge of the cam cover. This cover has a mark across the top, we like to see this as character! Sold as seen in the photos.

Used red cam cover to suit, 105 series mk2 1750 2000 cars with the two bolt holes on the front edge of the cam cover. This cover may want sanding and repainting for the best results. Sold as seen in the photos.

Used layshaft to suit all 1300/1600/1750 models from 1967-78.

Used layshaft to suit all 1300/1600/1750 models from 1967-78.

Used oil filter housing assembly to suit 105 series cars. This housing has some damage to its edge as can be seen circled in the photos.

Used oil filter cannister. We are unsure as to what specific model this fits as there have been so many variations in sizes over the years so please check your current cannister dimensions against the dimensions below before ordering: Diameter -...

Used oil filter cannister. We are unsure as to what specific model this fits as there have been so many variations in sizes over the years so please check your current cannister dimensions against the dimensions below before ordering: Diameter -...

Used gearbox crossmember/support to suit all 105/115 model cars, except mk1 1750 GTV's (68-70) which had a slightly different setup. These crossmembers are used but have been sandblasted and powder coated so the amount of surface pitting may vary, they...

Used original 14" wheel and tyre to suit Giulia Super's. This wheel has some surface corrosion but is a good candidate for refurbishment.

Used original 14" wheel and tyre to suit Giulia Super's. This wheel has some surface corrosion but is a good candidate for refurbishment.

Used original 5.5x14 inch wheel to suit 2000 GTV's, this wheel has some light surface corrosion but is in good shape for refurbishment.

Used original 4.5x15 inch wheel to suit early 105 cars, this wheel has some light surface corrosion, as well as some heavier corrosion on the outside diameter that would need cleaning up.

Used original 4.5x15 inch wheel to suit early 105 cars, this wheel has some light surface corrosion and some damage to the front lip as can be seen in the photos.

Used original 4.5x15 inch wheel to suit early 105 cars, this wheel is in good condition and is ready for a fresh coat of paint, comes with the 4 hubcap mounting clips.

Used original 4.5x15 inch wheel to suit early 105 cars, this wheel has been sandblasted and primed and is in good condition so it ready for a fresh coat of paint. It is missing 2 clips that will need renewing if you plan to use hubcaps.