105 SPIDER PARTS : INTERIOR

Rubber clip for holding down the rubber boot (trunk) mats down in early Spiders from 1966-78. 22 are required in total for Roundtail cars up to 1970 and 11 for Kammtail versions from 1970 onwards.  

Interior drivers side door pull to suit all 105 Series Spiders 1966-78. Also used on 101 Series Spiders as well.

Passenger interior grab handle as fitted to the door trim of all Spiders 1966-1978. Can be fitted to either side - dependent on left or right hand drive.

Heater facia panel to fit Roundtail Spiders.

Set of pedal aperture finishing rubbers for carpet set. If you are having a carpet set made for your standing pedals Bertone GT these are essential to get the original look & prevent wear & tear to the carpet - set 4 covering the brake and clutch pedals,...

Courtesy light unit for inside the rear vision mirror on all Spiders 1966 - 82.  

Dynamat SuperLite is a high-efficiency sound dampening material used to stop noise and vibration in your automobile. It is the same sticky butyl rubber Constrain Layer Damper (CLD) as Dynamat Xtreme but in a 30% thinner, and lighter form. Use Dynamat...

Applying Dynamat to panels, doors eliminates panel distortion by transforming the flimsy sheet metal into a solid non-resonant baffle. Dynamat improves stops vibration rattles and squeaks. The Xtreme Bulk Pack controls vibration four times better than...

Sheets of the original style sound deadening material as fitted to most 105 Series vehicles. Sheets measure 50 x 100cm and are made of heavy duty bitumen style material with a thick felt backing. Price is per sheet.

Rearview mirror support bracket for Spiders 1966-1993 . Before ordering, please make sure this is the correct part for your vehicle. If you require the miroor please click on the following link IN119 SPIDER INTERIOR REAR VIEW MIRROR 1983 ON

Reproduction plastic chrome surround for small dash/console instruments (fuel, water temp & oil pressure gauges) on various Coupes, Saloons and Spiders. Note that these have been remade in left hand drive style (angled towards the driver for...

Early heater slider control knobs. Fits all 105 models with early heater 1962-68.

Now back in stock - Heater fascia panel to fit 1750 & 2000 GTV and Berlinas and late GT Juniors with centre consoles. Now reproduced in chromed plastic as original. Version in polished aluminium also available - see code WA024/1...

Heater facia panel - black 2 piece for Spiders 1970-84 with centre console and some USA GTV. Made in plastic, exactly like original.

Heater control slider knob - chromed plastic. As originally fitted to Series 1 1750 GTVs, early GT Juniors and 1750 Berlinas, but will fit any heater slider control.

Heater slider control knob - black plastic as used in most 105 and 115 series cars.

Accelerator pedal, to fit all 105 Series cars with hanging pedal cars.  NOT SUITABLE FOR S4 SPIDER 

Brake / clutch pedal rubber with logo to suit all 105 Series cars. Although not original, the logo is a nice touch and reminiscent of the earlier Giulietta cars which did have this. Soften it in warm water before attempting to fit - you will find it much...

Brake and clutch pedal rubber to suit all 105 Series cars. Soften it in warm water before attempting to fit -you will find it much easier that way!

Accelerator pedal to fit all 105 Series cars plus 750,101, 102 and 106 series models. NOT SUITABLE FOR S4 SPIDER 

Door check strap only to suit all Spiders 1966-93. When changing the straps, you should also replace the rollers (item code MI022/1) and roller pins (MI022) at the same time - two required per door. Note that the complete check strap unit is also...

Complete Spider door check strap unit to suit all 105/115 Series Spiders.  Individual components are also available separately.

Door check strap roller - for all GT/GTVs to 1972 and all Spiders 1966-93.  Two required per door. We recommend you fit new rollers and pins (item code MI022) if you replace check straps to your door (item codes MI010 for Coupes, MI011 for Spiders). Also...

Door check strap roller pin - for all GT/GTVs to 1972 and all Spiders 1966-93.  Two required per door. We recommend you fit new rollers (item code MI022/1) and pins if you replace check straps to your door (item codes MI010 for Coupes, MI011 for Spiders)...