JUNIOR ZAGATO PARTS : BRAKES

Large brake servo/booster overhaul kit to fit the Lockheed brake servo fitted to single brake circuit 1750 models. For a kit just containing the vacuum valve and seal, see item code BR005/1

Original ATE rear axle brake pressure regulator valve. Normally fitted to cars from 1976 to 1984, however it can be fitted on early cars.  Please note, on some models it may require modification to make it fit.

Rear axle brake pressure regulator valve to fit all 105 Series cars. Produced as per original specification.

Rear axle brake pressure regulator valve to fit all 105 Series cars. This is similar in design to the unit fitted originally to 1990-93 Spiders but will work on all 105/115 models. Also fits 116 models until 1984. Please note, on some models it may...

3 way brake union to fit on the rear axle of all 105 Series cars including Montreals. Alsp fits some 750 and 101 Series cars. This hoses are compatible with 3/8 UNF unions under the code BR323

Front brake disc backing plate right, 1750 & 2000. Aluminium version - weighs only 177g.

Front brake disc backing plate left,  1750 & 2000. Aluminium version - weighs only 177g.

Front brake disc backing plate left, 1300 & 1600. Not suitable for 1600 Spiders produced from 1986 to 1993 as these were fitted with the larger front calipers from the 2000 cars, see part BR057,  Please note, this backing plate will not fit cars with the...

Front brake disc backing plate right, 1300 & 1600. Not suitable for 1600 Spiders produced from 1986 to 1993 as these were fitted with the larger front calipers from the 2000 cars, see part BR057. Please note, this backing plate will not fit cars with the...

Front brake disc backing plate left, 1750 & 2000

Rear brake disc backing plate

Front brake disc backing plate right, 1750 & 2000

Handbrake shoes Kit - Includes Side cables BR055 & BR056, , X2 short handbrake shoe spring BR094,  X2 long handbrake shoe spring BR095, X2 handbrake adjuster mechanism BR076,  X4 handbrake shoe retaining spring BR054, X4 handbrake shoe retaining pin...

BREMBO Handbrake shoes - set of 4 to suit all cars with ATE brake systems 1967 onwards. Fits inside in the 'brake drum' inside the rear brake disc. One set of 4 brake shoes per car.

Handbrake shoes - set of 4 to suit all cars with ATE brake systems 1967 onwards. Fits inside in the 'brake drum' inside the rear brake disc. One set of 4 brake shoes per car.

Clevis pin for the brake master cylinder, all cars with standing pedal. Pedals mounted on the floor. Diameter: 9.4mm Length: 30mm

Clevis pin for handbrake side cable. Used in conjuction with BR055 and BR056 Diameter: 8mm Length: 28.4mm

Handbrake side cable right

Left side handbrake cable (looking from the rear of the car). This goes from main cable end on the centre of the differential to the handbrake mechanism in the wheel.

Handbrake shoe retaining pin holder to fit the handbrake mechanism on 2000 (LSD) axle 105/115 cars from 1972-1993. 1 used per brake shoe, 4 used per car. The earlier pressed type is currently unavailable. Size 13.5mm narrowest diameter  X 18mm widest...

Short handbrake shoe spring to fit all 105 Series cars with ATE braking systems. One used per side, two per car. See BR093 for the matching long spring.

Long handbrake shoe spring to fit all 105 Series cars with ATE brakes. One used per side, two per car. See BR094 for the matching short spring.  

Handbrake lever assembly to fit the handbrake mechanism on ATE braked cars where the cable attaches to the handbrake mechanism.

Handbrake adjuster mechanism to fit the handbrake on all ATE braked system cars. Requires the 'sleeve' from your exisiting adjuster mechanism to work fully.