105 COUPE PARTS : USED PARTS

We have a large number of used Solex carburettors in stock currently of varying models and sizes. Please get in touch with information on what you need via email or telephone: Email - info@classicalfa.com Phone - 020 8688 4443 / +44 20 8688 4443...

Used GT right hand side door. This door is very corroded, however there are some solid parts that may be useful to someone that is repairing another GT door.

Used clutch arm / fork release arm. All cars with hydraulic clutch. We have a number of these in stock so the one you receive may not be the one photographed but will be in similar or better condition.

Used bonnet release lever for all 105 model cars. Fully functional. Please note late 105/115 Spiders have a plastic lever. We have a number of these in stock so the one you receive may not be the one photographed but will be in similar or better...

Used 105/115 series water temperature gauge. Veglia type. Sold as seen in the photos. Untested. ** NOTE ** - Jeager and Veglia gauges are not interchangeable.

Used 105/115 series fuel gauge. Veglia type. Sold as seen in the photos. Untested. ** NOTE ** - Jeager and Veglia gauges are not interchangeable.

Used 105/115 series fuel gauge. Jaeger type. Sold as seen in the photos. Untested. ** NOTE ** - Jeager and Veglia gauges are not interchangeable.

Used 105/115 series fuel gauge. Veglia type. Sold as seen in the photos. Untested. ** NOTE ** - Jeager and Veglia gauges are not interchangeable.

Used 105/115 series water temperature gauge. Veglia type. Sold as seen in the photos. Untested. ** NOTE ** - Jeager and Veglia gauges are not interchangeable.

Used bracket for 105/115 series small instruments. Please note there were 2 different styles used on these cars, so check the photos carefully. ** NOTE ** - We have a number of these items so the one you receive may not be the one photographed but will...

Used air filter trough to suit 105 series cars with the tubular style air filter box. This trough is in good condition but could use a clean up.

Used, right hand original quarter window winder to suit all 105 GTs and Giulias. This unit is in good condition and is fully functional. *we have a number of these mechanisms so the one you receive may not be the one photographed. However it will be in...

Right corner stainless steel bumper piece to suit mk1 1750's and stepfront GTs. This piece is in good condition for its age but will need polishing to bring the shine back to it, it also has the early type bracket used on some GTs from 66-68.

Right corner stainless steel bumper piece to suit mk1 1750's and stepfront GTs. This piece is in good condition for its age but will need polishing to bring the shine back to it.

Left corner stainless steel bumper piece to suit mk1 1750's and stepfront GTs this piece is used but has since been polished, it has some slight scuff marks and scratches to the finish as can be seen in the photos. Sold as seen.

The warm air duct bracket that sits under the carburettors attached to a hose to supply warm air to the airbox. Will fit any 105 car from 1970 onwards, this is a used part that has been media blasted and powder coated, as can be seen in the photos.

Used oil filter cannister. We are unsure as to what specific model this fits as there have been so many variations in sizes over the years so please check your current cannister dimensions against the dimensions below before ordering: Diameter -...

Used Alfetta 2000cc crankshaft. Currently around 020 undersize. Could also be fitted to a 105 series car if the crank were drilled to accept a spigot bush.

Used crankshaft from a 2000cc Alfetta engine. Main bearing and big end bearing journals are both currently at 010 undersize. As well as 2 litre Alfettas, it will also fit 2 litre 105-series engines if the rear of the crank is drilled out to accept a...

Used 1750 MK2 cylinder head. In good condition but it will need a skim because the mating surface has some scratches. 111.6mm thick approx. More photos upon request.

Used 1750 cylinder head. In good condition with only very light corrosion. 11.8mm thick. More photos upon request.

Used 1750 MK2 cylinder head. Dirty but in good condition. 111.8mm thick. No cam caps. Front bungs missing (but we can supply). More photos upon request.

Used 1750 cylinder head MK2. Very dirty but in good condition. 111.9mm. More photos upon request.

Used 2000 105 engine block. No front cover or main caps.