105 COUPE PARTS : ELECTRICAL

Indicator lamp, single position. Two fitted per car. Used on many 105 cars. Includes bulb holder and bulb.

Starter motor mounting plate that fits in between the starter and bell-housing on all 3 bolt starter motors. 1mm thick.

Pair of wiper blades 330mm to fit the bayonet/blade style wiper arms found on some 1963-67 GT and Giulia Ti / Super. These blades will match with the wiper arms that are available under item code WI002. They can be used as an alternative to WI001. Please...

Bosch starter motor, 3 bolt mounting and 9 tooth pinion to suit 2000 engines (105, 115, 116 series). ** NOTE ** - Some late 1600 cars from 1974 onwards may have a 9 tooth starter. Please count the teeth on your old starter carefully...

Headlight main beam warning lamp, fitted on many 105 cars. BLUE. Includes bulb holder and bulb.

Headlight dipped warning lamp, fitted on many 105 cars. GREEN. Includes bulb holder and bulb.

Handbrake warning lamp, fitted on many 105 cars. RED. Includes bulb holder and bulb.

Indicator lamp, fitted on many 105 cars. GREEN. Includes bulb holder and bulb.

New lightweight high-torque starter motor as originally fitted to Series 4 Spiders but made with an 8 tooth pinion for 1300/1600/1750 cars. Smaller and lighter than earlier starter motors and an ideal retro-fit for those looking to save some weight and...

Pair of wiper blades 330mm to fit the bayonet/blade style wiper arms usually found on all 1968-77 GTV, Junior and Giulia. These blades will match with the wiper arms that are available under item code WI002. They can be used as an alternative to WI026...

Special shouldered starter motor mounting bolt that should go in the middle bolt hole on all 3 bolt starter motors. Essential to make sure the starter motor is correctly located in relation to the flywheel and ring gear.

Lightweight high-torque starter motor. Smaller and lighter than earlier starter motors and an ideal retro-fit for those looking to save some weight and gain extra starting performance, especially on upgraded engines. 3 bolt mounting and 9...

Reproduction of the early style voltage regulator to suit all 105 series cars with dynamos/generators as well as 101 series cars as well.

Early style voltage regulator (Bosch) to suit all 105 series cars with dynamos/generators as well as 101 series cars as well.

Fits our battery clamp set and also the air filter housing of 105 series cars with the long air filter on the carb side.  

Main battery power lead connecting the battery to the starter motor on all 105 Series cars fitted with an alternator. Includes the feed wire to the alternator as well. Length - 156cm

Battery clamp set to suit all 105 Series cars with front mounted batteries as well as most 750 101 Series cars and some Alfetta 116. Please note - photo may not represent exactly what you receive - we buy these from 2 suppliers and some kits have...

Earth strap to fit the carburettor mounts on all 105 Series carburettor cars. Often missing or damaged on many cars we see, ideal to replace when you fit new carburettor mounts.

Good quality r eproduction of the moulded battery tray to suit all 105 series cars with batteries mounted in the engine bay from about 1968 onwards.

Electrical earth strap - fits between the body and the gearbox. 17 cm long.

Fantastic lightweight 40 amp output alternator built to look like the original Bosch dynamo/generator as fitted to Alfas from 1962 to 1968 but will also work on some Giuliettas from 1955 with a negative earth. Fits on the original mounting points on the...

New 55A alternator with built in voltage regulator to suit all 105/115 models fitted with alternators. As well as any 4 cylinder Alfetta. This style with the built in voltage regulator was original fitment to late Spiders as well as Alfa 75s, but...

Specially produced lightweight 45 amp output alternator. Designed to fit onto the exisiting mount and bracket on all alternator equipped 105 series cars. Includes a built in voltage regulator - very straightforward to fit with only two wire connections...

Pair of bayonet/blade style wiper arms to fit all non step front GTs as well as Giulia Supers and Berlinas. Note, that if you are replacing the original style arms with the grey caps over the mounting nuts, you will need a pair of the WI012 nuts to...