105 COUPE PARTS : USED PARTS

Used front propshaft to suit Spiders and GTs from early 1970s onwards with 9mm bolt holes. If you have an earlier car, you may require a shaft with 8mm bolt holes. This propshaft has some corrosion. However it is in fully usable condition...

Used front propshaft to suit Spiders and GTs from early 1970s onwards with 9mm bolt holes. If you have an earlier car, you may require a shaft with 8mm bolt holes. This propshaft has some minor surface corrosion. However it is in fully usable...

Used steering column sleeve to suit some 105 series cars, we are not sure which particular models this will fit so please check the photos and length dimension against your current sleeve. Length - 42.4cm

Used right side window regulator mechanism to suit early GTs, this was only used on the earlier cars before the newer pully and wire system was introduced, making this style of regulator very rare to find especially in working order such as this one.

Used set of original 6x14" Momo vega wheels. These wheels have been refurbished and are finished in a satin black. They are in fantastic condition with no visible marks and come with a set of Good Year tyres with a good amount of tread left on them. They...

Used front left bumper (stainless steel) to suit a late Stepfront GT. This bumper has some marks and scuffs but would polish up nicely, please see the photos for condition.

Front bumper to suit a mk1 1750 GTV. This bumper has no obvious dents, there are some marks and scuffs to the finish but these would polish out if some time is taken. Please see the photos for condition.

Used rear left bumper corner piece, stainless steel, to suit mk2 1750 / 2000 GTVs. This bumper is in good condition for its age, it will just need to be polished to restore its shine. Please see the photos for a visualization of surface marks.

Used, brake master cylinder push rod for standing pedal cars. This pushrod is in great condition and is totally functional with only a few marks.

Used servo bracket to suit all 105 series cars with Bendix servos. This bracket has some slight surface corrosion but is perfectly functional and would clean up nicely.

Used Original black plastic steering wheel centres usually found on the 'shallow dished' Hellebore steering wheels used in 1750 GTVs, Spiders and Berlinas, as well as some other models. This hub centre is in good condition, it may just want a new centre...

Used, original quarter window winder to suit all 105 GTs and Giulias. This unit is in great condition and is fully functional.

Used layshaft to suit all 1300/1600/1750 models from 1967-78.

Used layshaft to suit all 1300/1600/1750 models from 1967-78.

Used horn push frame to suit 2000 cars with the original deep dish steering wheel. This horn push has some surface marring so may want polishing back to a shine, but it is fully functional and intact.

Used original 4.5x15 inch wheel to suit early 105 cars, this wheel has some light surface corrosion and some damage to the front lip as can be seen in the photos.

Used original 4.5x15 inch wheel to suit early 105 cars, this wheel is in good condition and is ready for a fresh coat of paint, comes with the 4 hubcap mounting clips.

Used original 4.5x15 inch wheel to suit early 105 cars, this wheel has been sandblasted and primed and is in good condition so it ready for a fresh coat of paint. It is missing 2 clips that will need renewing if you plan to use hubcaps.

Used original 4.5x15 inch wheel to suit early 105 cars, this wheel has been sandblasted and primed and is in good condition so is ready for a fresh coat of paint. It is missing 2 clips that will need renewing if you plan to use hubcaps.

Used set of 4 steel wheels 5.5x15 inches. These wheels have been painted a lovely gloss white, there is some minor chipping to the edges as can be seen in the photos. These wheels come with the centre spinners and nuts to go with them.

Used rear centre bumper section to suit mk1 1750 GTVs and Stepfront Juniors. This bumper has a fair amount of denting so may need a bit of fettling and a polish to bring it back to life.

Used front bumper to suit 1750 mk2 / 2000 GTVs. This bumper has a couple of small dents and bend in one end all of which are circled in the photos, so will need fettling and some polishing up to bring it back to life.

Used front bumper to suit 1750 mk2 / 2000 GTVs. This bumper has a couple of small dents and some surface discolouration as seen in the photos, other than that it will just need polishing up to bring it back to life.

Used crossmember to suit post 1966 105 cars with the 4 bolt wishbones. This crossmember is in great condition for its age and these are hard to find, sold as seen in the photos.