105 SALOON PARTS : CLEARANCE

22mm open wheel nut - right hand thread chromed. Classic Alfa production of these original style wheel nuts.

Pair of polyurethane front anti-roll bar droplink bushes to suit early 105 series cars. These bushes are brand new. They are just not a production we usually sell.

Right hand, bayonet/blade style wiper arm to fit all non step front GTs as well as Giulia Supers and Berlinas. Note, that if you are replacing an original style arm with the grey cap over the mounting nut, you will need a WI012 nut to fit this to...

105.49 body type plate to fit a 1750 Berlina Gd e CKD (RHD South African Berlinas). This plate is brand new. It is just not one we usually sell.

Pair of Weber 45 DCOE rampipes. These are brand new, they are just not a production we usually sell. Distance from flange to rolled opening - 3cm Total height - 6.7cm

Cloverleaf metal keyring. These keyrings are brand new we just don't usually sell this production.

Clutch master cylinder boot to fit Bonaldi master cylinders fitted to all 105 Series cars with standing pedals (LHD cars to about 1970 and all RHD cars). Will not fit ATE cylinders. This clutch boot is brand new, it is just not a production we usually...

Lightweight billet steel competition 6 bolt flywheel to suit 2000 competition engines using early mechanical clutch. This flywheel was used for Classic Alfa R&D and is therefore missing its ring gear which you can buy separately under the...

Lightweight billet steel competition 6 bolt flywheel to suit 2000 competition engines using early mechanical clutch. 105 tooth ring gear, 200mm driven plate. Also suitable for using a later 6 bolt 1600 crank in an early engine. This flywheel...

Rear brake pads - set of 4 - to suit 105 cars with ATE brakes. These pads are brand new they are just not a brand we currently sell - ALA (made in italy)

Left Inner headlamp (5 3/4") mounting frame for 4 headlight Giulia saloon. This headlamp frame is brand new it is just missing the plastic fittings we usually sell with the frame. You can purchase 2 of the 3 fittings individually under the code...

Exhaust flexi joint for custom exhausts, this joint has an outer bore size of 50mm on one side and 54mm on the other.

Giulia saloon rear inner door panel pair in black, to suit cars made between 1962-73. This is the rear pair only, this pair has a slightly offset heat stitch pattern from left to right as can be seen in the photos. this will barely be noticeable once...

Original equipment Sachs clutch frction plate to fit all 105/115 Series cars 1968 onwards. This friction plate is brand new, it is just the last one of an old production we no longer sell.