105 SALOON PARTS : RUBBER

Get the rubber pedal base seal & the metal retaining bracket (to suit all right hand drive 105 series cars with floor hinged pedals) RB066 and RB067 together for a better price!

Metal pedal base seal bracket to retain the rubber seal available under code RB066 on all right hand drive 105 Series cars.  Note that this bracket will require some 'relieving' on the inner left side to fit properly to the car. It's much better that the...

Right hand drive pedal base seal - for all rhd cars from 1964 to 1978. To properly fit the boot, the pedal box must be removed from the car and the pedal shafts removed from the pivot. The boot is fitted by inserting the shaft of the pedal through from...

Rubber section that seals around the edge of the radiator aperture in the bodywork on all 105 series GT & GTV, Spider and Saloons from about 1967 onwards where the radiator sits on a rubber support (available under item code WA050) on the front...

Bottom support rubber for all radiators that sit on the front crossmember of the car. Suits GTVs, Spiders and Saloons from 1968 to 1988 and GT Juniors from 1970 onwards.  ONE only required per car.

Bush for the throttle linkage mechanism where it pivots on the firewall/bulkhead. Two required per car.

Pair of rear numberplate light seals to suit 101 Series Spiders. Light units available separately under code 750-311 or 750-311/1 (non Carello version). Can also be used on the same light units fitted to all 105 Series GT/GTVs up to the 1750 Mk 1, early...

Rubber seal for the quarterlight glass hinge. Fitted on all models of GT, GTV and Giulia/Berlina saloons.

Rear rubber seal in the correct style for the Giulia & Berlina saloon - with a flocked/velour edge. This seal will do one door.

Front rubber seal in the correct style for the Giulia & Berlina saloon - with a flocked/velour edge. This seal will do one door.

Rubber door seal to fit onto the rear doors of all Giulia and Berlina saloons. See RB036 and RB036/1 for the seals that fit the front doors and RB037 for the seal that fits onto the bodywork for the rear doors.  

Rubber door seal to fit on the body of all Giulia & Berlina saloons - for the rear door. See RB036 and RB036/1 for the seals to fit the front doors & RB037/1 for the seal that fits on the rear door.    If you require the velour type seal, please see RB137

Rubber door seal to fit on the front door frame of Giulia and Berlina saloons.  See RB036 for the seal that fits on the body and RB037 & RB037/1 for the matching rear door seals.  

Rubber door seal to fit on the body of Giulia and Berlina saloons - for the front door. See RB036/1 for the seal that fits on the door itself and RB037 & RB037/1 for the matching rear door seals.   If you require the velour type seal, please see RB136

Pair of rubber seals to fit on the front edge of the rear door on all Giulia saloons.

Rubber washer that fits between the bumper bar and the bodywork on all 105 Series GTs and Saloons. Sold individually.

Complete car set of door handle rubber seals to fit the larger door handles on later Giulia saloons.

Set of 4 door handle rubber seals to fit the smaller door handles on earlier Giulia saloons.  

Fuel flap buffer for all 105 series Coupe and Saloon models. Sold individually, two used per car. The cars should also be fitted with the rubber profile section available under code RB072 as well.

Plastic profile moulding that fits around the edge of the guard inside the fuel flap to protect it from damage from the fuel filling hose. Often missing on most cars! Use in conjunction with the two small rubber buffers available under code MI016 that...

Rubber boot/trunk seal for all Berlina 1750 & 2000 saloon models.

4 piece rubber boot/trunk seal set for all Giulia saloon models.

Protection cover for the fuel tank sender. Will fit all 105 Series cars. Please note this is made of black rubber, whereas the original type was made of a dense foam material and had an internal metal spine.

Rubber boot for the fuel filler neck on 2000 GTVs and Berlinas with the smaller diameter fuel tank neck - approx 45mm. For 1300, 1600 & 1750 cars with bigger diameter tank necks, see part number RB017.