105 SPIDER PARTS : FILTERS

Filter king fuel filter rubber seal. 

Filter king fuel filter & regulator with glass bowl

Valve cover bolt for late model Spiders 1988-93 mainly cars with Bosch fuel injection.  

Support bracket for the early style 'crossover' plenum. Please see pictures 

Curved oil breather hose from the cam cover to the air filter canister on many of the 105 and 116 series cars. This fits both the early style 'crossover' air-cleaner setups as well as the later tubular style air-cleaners.

Hose from the bottom of the oil separator cannister to the fuel injection plenum on late model Spiders 1988-93.

Oil breather hose to suit fuel injected Spiders from 1988 to 1993. Goes from the cam cover to the oil separator unit mounted on the inner wing/fender.

Hot air ducting tube (60mm diameter) to suit all 105 series cars from 1970 on with the 'warm air' intake panel located on the side of the engine block. This tube goes from the air cleaner to the plate.

Metal strap to fit the tubular air filter canister fitted to 105 Series cars from about 1970 to 1986 plus some 116 models.

Metal strap for the air filter housing on early 105 series cars with the air filter on the exhaust side. 

Air filter to fit the single carb FISPA cannister setup mainly found on early 105 Series Giulia Saloons. Dimensions: Height - 11cm Outer Diameter - 13cm Internal Diameter - 9cm

Air filter to fit the single carb FRAM cannister setup mainly found on early 105 Series Giulia Saloons. Dimensions: Height - 13.5cm Outer Diameter - 16cm / 18.5cm Inner Diameter - 11cm

Sport Air filter for better less restrictive induction. To fit the cannister on the early 'crossover' intake as seen on cars up to 1970 (105.26 early type). New production to our own specification, fits much more tightly into both styles of...

Sport Air filter for better less restrictive induction. For cars with cylindrical Air filter - later type (105.48) - to suit later 105s with the filter on the carb side plus some 116 models. Please check measurements before...

Cylindrical Air filter - later type (105.48) - to suit later 105s with the filter on the carb side plus some 116 models. Please check measurements before ordering! Dimensions: Length - 41cm Diameter - 12cm

Late style tubular air filter, as normally fitted to carburettored S3 Spiders and some 116 models. Please check the measurement of your old filter! Dimensions: Length - 35cm Diameter - 12cm (tapering to 11cm)

Air filter to fit the cannister on the early 'crossover' intake as seen on cars up to 1970 (105.26 early type) New production to our own specification, fits much more tightly into both styles of early 105 Series 'cross over' air filter housings,...

Rubber 'crossover' trunking to suit early air filter set-up on 105 series cars. Also fits 1600 SS and 101 1600 Spider Veloce. Please see EN116 for the original style fitting clips.

Pair of air filters to fit the intake system of US specification SPICA mechanical fuel injection 4 cylinder cars. Dimensions: Length - 185mm Diameter - 90mm

Period rampipes - reproduction of the style used on GTA Corsa cars in period. The trumpets can be set at any angle you wish to alter the ram effect of the air intake. Can be used in conjunction with the filter socks available under item code FL049. This...

Fixing tab rampipe 40 DCOE. 4 required per carburettor. 

Fixing tab rampipe 45 DCOE. 4 required per carburettor. 

Pair of 70mm mesh filters to fit over the Weber 48mm DCOE rampipes. Two pairs required per car.

Pipercross filter socks - set of 4 for those with GTA style intake trumpets fitted or similar rampipes.