105 SPIDER PARTS : USED PARTS

Used original 4.5x15 inch wheel to suit early 105 cars, this wheel has been sandblasted and primed and is in good condition so is ready for a fresh coat of paint. It is missing 2 clips that will need renewing if you plan to use hubcaps.

Used set of 4 steel wheels 5.5x15 inches. These wheels have been painted a lovely gloss white, there is some minor chipping to the edges as can be seen in the photos. These wheels come with the centre spinners and nuts to go with them.

Used front bumper and crash bar to suit Series 3 Spiders, this bumper is in overall good condition, it does have a scuff that may need filling and the center intake hole may need some fettling to get it back into shape all of which can be seen in the...

Used rear centre bumper to suit series 3 spiders. Sold as seen.

Used rear centre bumper to suit series 3 spiders. Sold as seen.

Used rear bumper centre plastic cover to suit series 3 spiders. This is the cover only not the bumper bar.

Used header rail to suit a Roundtail Spider 66-69, this header rail has some surface corrosion and a dent, however these are very very rare to find so would be worth the time and effort to put right, if you are in need of one.

Used crossmember to suit post 1966 105 cars with the 4 bolt wishbones. This crossmember is in great condition for its age and these are hard to find, sold as seen in the photos.

Used right hand drive conversion dashboard to suit late S3 and S4 spiders. This dashboard is in good condition for its age, sold as seen in the photos.

A used pair of 1970-93 spider windscreen pillar trims, these are in good condition with only a few scuff marks on the chrome and small corrosion marks in certain areas, as can be seen in the photos.

The warm air duct bracket that sits under the carburettors attached to a hose to supply warm air to the airbox. Will fit any 105 car from 1970 onwards, this is a used part that has been media blasted and powder coated, as can be seen in the photos.

Used cam cover to suit, 105 series mk2 1750 & 2000 cars with the two bolt holes on the front edge of the cam cover. This cover has some surface corrosion and some pitting in an area as can be seen in the photos, this is reflected in the price.

Used, original cam cover to suit 2000 SPICA injected 105 series cars. Sold as seen in the photos.

Used cam cover to suit, 105 series mk2 1750 2000 cars with the two bolt holes on the front edge of the cam cover. Sold as seen in the photos.

Used cam cover to suit, 105 series mk2 1750 2000 cars with the two bolt holes on the front edge of the cam cover. Sold as seen in the photos.

Used chain tensioner sprocket to suit 105/115 Series engines. This part is used but in fully usable condition with no chipped teeth.

Used valve spring shim to suit 105/115 Series cars. (approximately 0.5mm). These shims sit inside the spring cup, under the valve spring. These valve shims are used but are in fully usable condition. We have a number of these so the one you receive may...

Used set of 6 105 Series cam caps. These were removed from a running head. These caps are used however they are still in full usable condition. We have a number of these sets so the set you receive may not be the one photographed but will be of...

Used upper cylinder head bung plug to suit 101/105/115 Series engines. These bungs are used but still in usable condition. We have a number of these so the one you receive may not be the one photographed but will be of comparable condition.

Used front cylinder head bung/plug to suit 105/115 Series engines. These bungs are used but still in usable condition. We have a number of these so the one you receive may not be the one photographed but will be of comparable condition.

Used rear cylinder head bung/plug to suit 105/115 Series engines. These bungs are used but still in usable condition. We have a number of these so the one you receive may not be the one photographed but will be of comparable condition.

Used reproduction standard camshafts as found in European specification 1750 & 2000 105 and 116 engines. 10.1mm lift, 230 deg duration at .050" clearance approximately. These cams are used but they are in very good condition so would be a...

Used cam sprocket to suit all 105/115 engines. These sprockets are used but are still in fully usable condition with no chipped teeth. We have a number of these so the one you receive may not be the one photographed but will be of comparable condition.

Used inlet manifold to suit 105 series cars that have a screw in thermostat, this manifold is all in good shape except for some pitting on the thermostat outlet as can be seen in the photos. This manifold has been bored out to 45mm. So will only suit...