105 SALOON PARTS : FRONT SUSPENSION & STEERING

Adjustable top suspension arm as fitted to GTAs - left side of car. Allows camber angles to be adjusted for competition use. When fitting these arms to your car, we recommend that you replace the rubber bushes supplied with our polyurethane Superflex...

OE Quality front wheel bearing kit to fit 750, 101 and 105 Series cars. Includes inner and outer bearings, oil seal. Also suitable for 1900 Please note, we will supply either FAG or SKF as supply can be sporadic for both brands.

Front wheel bearing kit to fit 750, 101 and 105 Series cars. Includes inner and outer bearings and oil seal.

Front wheel stub axle nut, right hand thread. To suit all 105 Series cars

Front wheel stub axle nut, left hand thread. To suit all 750, 101 and 105 Series cars.

Front hub oil seal Please note these are included with SU020 wheel bearing kit.

Front wheel bearing grease cap to suit all 750, 101 and 105 Series cars.

Early front suspension bush kit standard - including lower wishbone bushes, castor arm bushes, anti roll bar rubbers & drop link bushes. From 1962-1967

Front suspension bush kit standard - including lower wishbone bushes, castor arm bushes, anti roll bar rubbers & drop link bushes. Please state year & model of car when ordering.

Early front suspension bush kit uprated - including lower wishbone bushes, Superflex castor arm bushes, Superflex anti roll bar rubbers and drop link bushes.

Front suspension bush kit uprated - including lower wishbone bushes, Superflex castor arm bushes, Superflex anti roll bar rubbers, drop link bushes. Please state year & model of car when ordering & whether a sport anti roll bar has been fitted and if it...

Spacer washer for the lower wishbone bush on all 105 series cars. One washer used per bush. The bushes are available separately under item code SU042, wishbone bush nut under item code SU042/1, tab washer SU043/1 and cap under item code SU043.

Bottom front wishbone bush end nut for all 105/115 Series cars. 2 required per side, 4 in total per car. 

Bottom front wishbone bush for all 105/115 Series cars. 2 required per side, 4 in total per car. 

Top quality (Würth brand) nylock nut to fit the 4 front suspension wishbone mounting to crossmember bolts on all 105 Series cars 1967 onwards (4 per side, 8 per car) as well as attaching the steering arm to the front suspension upright - 2 nuts per side...

Tab washer for the lower wishbone bush on all 105 series cars. One washer used per bush. The bushes are available separately under item code SU042 and end caps under item code SU043.

End cap for the bottom wishbone bush on all 105 Series cars.

Spacer for the thinner versions of the castor arm bush usually fitted to cars up to the mid/late 1970s. Fits where the castor arm attaches to the top arm of the front suspension. Not required on cars with Superflex polyurethane bushes, but often missing...

Polyurethane castor arm bush to fit in the top suspension arm on all 105 Series cars. A worthwhile replacement for the standard rubber bush and much more long-lasting. We recommend Superflex as they only use very high quality TDI polyurethane as opposed...

Castor arm bush

Superflex polyurethane top arm inner bush, sold as a pair. 

Top arm inner bush

Top quality (Würth brand)nylock nut to fit the rear mounting bolt of the rear suspension trailing arm as well as the bolt on the inner side of the top front suspension arm.

Front early lower anti-roll bar end bush set. Original rubber style. Suitable for all 750 & 101 cars and also fitted on early 105 cars. To re-bush the complete drop link, you will also need the upper bush - SU054. If you require the washers...