105 SPIDER PARTS : OTHER RUBBER PARTS

Headlight seal to fit all 105 Series Spiders 1966 - 93 without perspex headlight covers - such as Spider Junior and all USA models. Cars fitted with covers do not use a seal. Also fits early GT (1964-67), early Giulia saloon, 2600 Sprint, 2000/2600...

Pair of headlight wiring grommets to fit into the rear of the headlight bowl on all 105 Series Spiders 1966-93 and all Step-front GTs. Can also be used in the outer headlight bowls on some 1750 2000 GTVs, GT Juniors and all Saloons. Suitable for...

Bootlid/trunk seal to fit all Roundtail Spiders 1966-70

1970-93 Spider boot/trunk lid rubber seal.

1970-93 Spider windscreen rubber.

Windscreen rubber to suit all 1966-70 Roundtail Spiders.

Rubber seal for all models of 105 Series Spiders 1966-1993, used where the scuttle panel attaches to the firewall.  

Rubber seal that fits between the top of the right front wing and the scuttle panel on Spiders. Originally fitted to later Series 3 and 4 Spiders, but can be fitted to any Series 2 car as well. See item code RB078 for the same part for the left hand side...

Rubber seal that fits between the top of the left front wing and the scuttle panel on Spiders. Originally fitted to later Series 3 and 4 Spiders, but can be fitted to any Series 2 car as well. See item code RB078/1 for the same part for the right hand...

Large rubber seal/gasket that fits between the transmission tunnel pressing and the transmission tunnel apeture cover (either metal or plastic/foam versions) on most of the 105 series range. Fitted to Sprint GT, GTV, GTC & GTA models, all Roundtail and...

Large rubber floor bung to fit into the pressing holes in the floor panel of all 105 Series cars. Also used in the spare wheel well too. Total 8 required for GTs, Saloons and Montreals and 6 required for Spiders. Also fits many 116 and 75 models.

Rubber gaiter that fits over the transmission tunnel aperture cover (that attaches to the transmission tunnel pressing) inside the cockpit of all 105 series Coupes, Saloons and Spiders. Is covered by the centre console in cars with the consoles fitted...

Rubber seal for the end of the windscreen base trim (right side) as originally fitted to Series 3 and Series 4 Spiders. Can also be fitted to Series 2 cars.

Rubber seal for the end of the windscreen base trim (left side) as originally fitted to Series 3 and Series 4 Spiders. Can also be fitted to Series 2 cars.

Rubber seal for heater box. Fits all 105 series cars from 1968 onwards.

Metal pedal cover plate to fit all left hand drive Spider models with standing pedals.

Front hood/soft top plastic finisher for hood seal to fit all Roundtail Spiders 1966-69

Set of three rubber stoppers for the pedal box on left-hand drive standing pedal 105 series cars 1964-69.

Rubber seal to fit between the pedal housing and the bodywork on all left hand drive 105/115 Series cars with hanging pedals.

1966-69 Spider side window seals 6.

Front hood/soft top seal to fit all Roundtail Spiders 1966-69

Metal channel for the front soft-top seal on all Spiders 1970-93. See item RB027 for the rubber seal.

Soft-top front rubber seal to suit all Spriders 1970-93. Fits in channel (available under code RB028) that is attached to the header rail of the soft-top and seals against the top of the windscreen.

Get the rubber pedal base seal & the metal retaining bracket (to suit all right hand drive 105 series cars with floor hinged pedals) RB066 and RB067 together for a better price!