75-MILANO PARTS : CYLINDER HEAD 4 CYL

We are taking delivery of 75 parts every week and will be adding them to our website as soon as they are unboxed and photographed.

Woodruff key for 4 cylinder and V6 models.

Athesil RTV silicone sealant. A premium sealant/ gasket maker developed by Athena for professional use in engine maintainace and repair. The RTV (room temperature vulcanizing) silicone seals plastic metal componants, crankcases, manifolds ...

Exhaust manifold nut to suit 101, 105, 116 and 75 engines, including V6. 8 fitted per cylinder head. These are a smaller outer diameter than the original which makes tightening easier as you have more access room around the nut.

Exhaust/inlet manifold stud 34mm to suit all 4 cylinder 101, 105, 116 and 75 engines, including TS. There are 8 on the exhaust side and 7 on the inlet side, of which three are longer and not currently available.   Please measure your existing inlet studs...

Black plastic style bayonet fixing Olio cap Fits late 105 spiders plus GTV6 and 75. (note original caps with the cross and serpent logo currently unavailable)

Cylinder head nut washer to fit 1750/2000 engines.

Cylinder head nut in black for 105, 1750 2000 engines, including TS.

Cylinder head nut for 105, 1300 1600 engines.

Later style valve/cam cover hold down bolt with the large flats suitable for use with a 17mm spanner. Fits 4 cyl 105, 116 and 75 engines.

Bracket fitted on top of cylinder head used to lift engine out, fitted to 101, 105, 116 and 75 engines (excluding TS and V6). 

Set of six 'washers' (four fibre, two aluminium) for the cam/valve cover hold down bolts on all 101, 105, 116 and 75 engines (excluding Ts and V6). The same washers are also used on Montreal engines - please enquire in need. Note that the aluminium...

A pair of 'half moon' rubber seals for the back of the camshaft housing at the rear of the cylinder head on 4 cylinder 105, 116 and 75 engines.

Lower valve spring cup washer. To suit 4 cyl 101, 105, 116 and 75 engines including TS.

Set of standard valve springs to suit all 4 cylinder 101, 105, 116 and 75 engines, including TS.

Exhaust valve guide to suit all 4 cylinder 101, 105, 116 and 75 engines, plus Montreal - with 9mm valve stems. Not TS. Sold individually.

Inlet valve guide to fit all 4 cylinder 101, 105, 116 and 75 engines - plus Montreal - with 9mm valve stems. Not TS. Can also be used as an exhaust valve guide if you wish to fit valve stem seals on the exhaust valves.  Sold individually.

OE quality valve guide stem seal -  to fit the inlet valve guide on all 101, 105, 116 and 75 engines (including V6) with 9mm valves and valve guide stem seals. Goetze brand or similar. Also used on the inlet guide on Montreal engines. Not suitable for TS.

Valve shim to fit GTA, 750 Giulietta and 75 Twin Spark engines. They are available in increments of .025mm from 1.500 (.059")  to 3.500 mm (.138"). Please select size from the drop-down menu.       

Valve shim to fit standard valve stem size of 9mm - available in sizes from 1.5mm (.059") to 3.5mm (.138"). Suitable for all 4 cylinder 101, 105, 116 and 75 engines including V6 but excluding TS. Please specify the sizes you need on the drop-down menu...

Classic Alfa production cam follower to suit all 4 cylinder 101, 105, 116, Montreal and 75 engines including TS and V6 (on the inlet side only). Made in the UK with the correct profile on the lip of the follower. Beware cheaper productions made in Asia -...

Reproduction cam follower to suit all 4 cylinder 101, 105, 116, Montreal and 75 engines including TS and V6 (on the inlet side only). We recommend our using our production EN078 if you are using high lift camshafts.

Exhaust valve - 1600/1750. High quality, Italian made valve.

Inlet valve - 1600/1750. High quality, Italian made valve.