The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

JUNIOR ZAGATO PARTS : OTHER REAR SUSPENSION PARTS

  • PRODUCTS PER PAGE
  • SU203 NYLOCK NUT - FRONT OF TRAILING ARM

    Top quality (Würth brand) Nylock nut to fit the bolt in the front end of the rear suspension trailing arm on all 105 Series cars. Sold individually, 2 required per car.

    £2.75
  • SU062 REAR SUSPENSION TRAILING ARM - REAR BUSH - H…

    Uprated (shore 80 rating) rubber bush to fit the rear joint of the trailing arm to the back axle on all 105/115 series cars including Montreals. Approx 44mm diameter. Standard version of the bush is available under item code SU061 and Superflex...

    £15.00
  • SU064 REAR SUSPENSION TRAILING ARM - FRONT BUSH - …

    Uprated (shore 80 rating) rubber bush to fit the front joint of the trailing arm to the body on all 105/115 series cars including Montreals. Approx 50mm diameter. Standard version of the bush is available under item code SU063 and Superflex poly...

    £15.00
  • SU066 SUPERFLEX REAR TRAILING ARM BUSH - FRONT - P…

    Superflex rear trailing arm bush - fits into front mounting connected to the body. Suitable for track day and competition use. Two bushes required per car, sold as a pair.

    £40.00
  • SU067 REAR SUSPENSION TRAILING ARM BUSH - PAIR

    Superflex polyurethane bush to fit into the rear joint of the trailing arm where it connects to the rear axle. Much stiffer than rubber bushes, we recommend them only for track use. Sold as a pair.

    £42.00
  • SU103 BOLT FOR REAR OF TRAILING ARM

    Bolt for rear suspension trailing arm. Goes through the bush at the rear of the arm and connects the rear anti-roll bar to the suspension. 2 required per car.

    £13.95
  • SU103/1 FRONT BOLT FOR THE REAR TRAILING ARM

    Front bolt for the rear suspension trailing arm. Goes through the bush at the front of the arm. 2 required per car. All cars from 1964-78 and all Spiders until 1993.

    £4.50
  • SU108 SET OF RUBBER SHOCK ABSORBER BUSHES

    Set of (12) original style rubber bushes to fit the top of the front shcok absorber and the top and bottom of the rear shock absorber on all 105 Series cars, including Montreals. For uprated polyurethane versions, see code SU018.

    £44.00
  • SU018 SUPERFLEX SHOCK ABSORBER BUSH- SET OF 4

    Superflex polyurethane heavy duty shock absorber bush. Fits the upper section on front shock absorbers and top and bottom of the rear shock absorbers on all 105 Series cars. We recommend Superflex as they only use very high quality TDI...

    £11.50
  • SU068 T-BAR CONICAL BUSHES - PAIR (STD)

    Pair of standard rubber T-bar conical bushes for the joint between the rear suspension T-bar and the top of the differential. See item code SU069 for the Superflex version of the bush - our recommended fitment.

    £3.00
  • SU069 T-BAR CONICAL BUSHES - PAIR SUPERFLEX

    A pair/set of polyurethane Superflex T-bar conical bushes for the joint between the T-bar and the top of the differential. We recommend the fitment of Superflex bushes as they are much longer lasting that the standard rubber bushes and also improve...

    £10.50
  • SU071 SUPERFLEX T-BAR END THRUST WASHER - PAIR

    Superflex polyurethane rear suspension T-bar end thrust washer. Two required per car, sold as a pair. Superflex only use very high quality TDI polyurethane as opposed to NDI polyurethane used by many cheaper brands.

    £9.00
  • SU070 T-BAR END BUSH

    Metalastic bush for each end of the rear suspension T-bar where it attaches to the body frame. Two bushes required per car. New housings for the bush are also available under code SU070/1. Thrust washers also available under code SU071

    £16.50
  • SU070/1 T-BAR END BUSH HOUSING

    Metal housing for the bush attached to the outer end of the rear suspension T-bar. Two required per car. The actual bush is available separately under item code SU070 and thrust washers under code SU071.

    £28.00
  • SU090 T-BAR END SPACER 2MM

    2mm steel spacer used to "shim" the rear T arm so that the axle sits symmetrically on the car and your wheels align correctly. If you measure the gap between the rear tyre and the wheel arch on the left side and the right side you can often see a marked...

    £5.50
  • SU060 REAR ANTI-ROLL BAR RUBBER

    Rear anti-roll bar rubber to suit standard sized rear bars. Two required per car.

    £2.95
  • SU200 NYLOCK NUT - SPRING PAN TO WISHBONE BOLTS & …

    Top quality (Würth brand) Nylock nut to fit the 4 bolts that attach the front suspension spring pan to the wishbone, as well as each track rod end and the 4 bolts on the rear axle shafts that bolt up the wheel bearing housing on each side.

    £0.95
  • SU023 REAR WHEEL BEARING KIT 1300-1750 CARS TO 197…

    Rear wheel bearing kit - bearing and oil seal - to suit 1300, 1600 and 1750 cars until approximately 1974. Does not suit the 2000 style limited slip rear axle as that has larger diameter halfshafts. See item code SU023/1 for the equivalent part for the...

    £24.00
  • SU023/1 REAR WHEEL BEARING KIT - LIMITED SLIP 2000…

    Replacement rear wheel bearing kit - bearing, seal and shrink ring - to suit all limited slip axles (found in all 2000 cars) from 1972 onwards and all 1600 cars from 1975 onwards. One kit does one side of the axle, two required per car. See item code...

    £26.50
  • SU023HD - SKF REAR WHEEL BEARING KIT

    OE quality rear wheel bearing kit - bearing, seal and shrink ring - to suit all limited slip axles (found in all 2000 cars) from 1972 onwards and all 1600 cars from 1975 onwards. One kit does one side of the axle, two required per car. Note...

    £45.00
  • SU025 REAR HALFSHAFT OIL SEAL 1300/1750 TO 1974

    Replacement rear halfshaft oil seal to suit 1300, 1600 1750 rear axles with the smaller diameter halfshafts used to approximately 1974. See item code SU026 for the equivalent seal for the larger style limited slip differentials used on 2000 engined...

    £3.25

Follow Us @classicalfaltd