-
EN170/1 BUSH ENGINE BLOCK - 2000
Bush engine block. Height is 14.5mm. locates the lower pulley in the block. MUST BE HONED 2000 engines.
£12.00 -
AC130 ATHESIL RTV SILICONE SEALANT 80ml
Athesil RTV silicone sealant. A premium sealant/ gasket maker developed by Athena for professional use in engine maintainace and repair. The RTV (room temperature vulcanizing) silicone seals plastic metal componants, crankcases, manifolds ...
£6.50 -
EN039 CRANKSHAFT OILWAY PLUG
Aluminium crank oilway plug. 6 required per car.
£1.50 -
EN117 CONROD BOLT & NUT SET - 1750/2000
Conrod bolt & nut set, to fit 105, 116 and 75 1750/2000 engines, including TS. Can be used on 1600 cars but the shoulder part doesn't sit centrally on the two conrod halves.
£150.00 -
EN169 POINTER TOP DEAD CENTRE 125MM CRANK PULL…
Pointer front crankshaft pulley for top dead centre. Suitable for crank pulleys which are 125mm
£12.00 -
EN168 POINTER TOP DEAD CENTRE 105MM CRANK PULL…
Pointer front crankshaft pulley for top dead centre. Suitable for cracnk pulleys which are 105mm
£11.00 -
EN100/1 WASHER RING - 6 BOLT CRANK
Washer ring to fit all 6 bolt hole cranks as fitted to 105 Series 2000 engines.
£9.00 -
EN124 FLYWHEEL HALF MOON FIXINGS - 8 BOLT FLYW…
Flywheel to cranckshaft half moon fixings, to fit 8 bolt 101 & 105 series flywheels found on 1300, 1600 & 1750 cars.
£39.50 -
EN119 CRANKSHAFT FRONT PULLEY NUT
Front crankshaft pulley nut to fit all 4 cylinder 101, 105 and 116 engines. Replace in conjunction with the tab washer available under item code EN112
£9.00 -
EN100 FLYWHEEL BOLT - 6 HOLE FLYWHEEL
New bolt to fit all 6 bolt hole flywheels 1600-2000cc. Sold individually. See item code EN099 for bolts to fit 8 bolt flywheels.
£4.50 -
EN099 FLYWHEEL BOLT - 8 HOLE FLYWHEEL
Flywheel bolt to fit 8 bolt 101 & 105 series flywheels found on 1300, 1600 & 1750 cars. See item code EN100 for bolts suitable for 2000 6 bolt style flywheels.
£5.25 -
EN519 ARP CONROD BOLT SET 1750/2000 ENGINES
ARP Racing conrod bolts for 1750 & 2000 engines, including TS. Made in the USA to high specifications.
£200.00 -
EN082 CONROD BOLT - 1750/2000
Conrod bolt to fit 105 and 116 series 1750/2000 engines including TS, can be used on 1600 cars but the shoulder part doesn't sit centrally on the two conrod halves.
£15.00 -
EN081 CONROD NUT - 1600/1750/2000 ENGINES
Conrod nut to fit all 105 Series 1600, 1750 and 2000 engines including TS plus 101 1600 engines. Not for 1300.
£4.00 -
EN062 ENGINE MOUNT WITH FRAME - RIGHT (INTAKE)…
Engine mount and metal frame for the right (intake) side of the engine.
£27.00 -
EN061 ENGINE MOUNT WITH FRAME - LEFT (EXHAUST)…
Engine mount and metal frame for the left (exhaust) side of the engine.
£27.00 -
EN129 1300 CYLINDER HEAD STUD
Cylinder head stud (approx. 238mm long) to fit late 101 and all 105 Series 1300 engines. Sold individually, 10 used per car.
£18.00 -
EN131 1750/2000 CYLINDER HEAD STUD
Cylinder head stud to suit 1750 & 2000 cc engines. 10 per engine if you are replacing them all.
£19.95 -
EN130 1600 CYLINDER HEAD STUD
Cylinder head stud (246mm long) to fit 101, 105 and 116 Series 1600 engines.
£17.95 -
EN135 BLOCK TO BELL HOUSING STUD (HYDRAULIC CL…
Stud for the rear of the engine block to attach the bell housing of the gearbox on all hydraulic clutch 105 twin-cam engines. 4 studs used in total. For the relevant nut, see part FL109.
£3.95 -
EN149 2000 CRANKSHAFT PULLEY 125mm
2000 crankshaft pulley 125MM.
£60.00 -
EN146 1600 CRANKSHAFT PULLEY
1600 crankshaft pulley to fit later 101 and all 105 Series engines. 105mm diameter.
£60.00 -
EN170 BUSH ENGINE BLOCK - 1300/1600/1750
Bush engine block. Height is 17.5 m. locates the lower pulley in the block. MUST BE HONED 1300,1600 & 1750 engines.
£12.00 -
EN101 CRANK SPIGOT BUSH - 20mm - MECHANICAL CL…
20mm diameter crankshaft spigot bush to suit all 101 and 105 series cars with mechanical (non-hydraulic) clutches.
£10.50