JUNIOR ZAGATO PARTS : OTHER COOLING PARTS

Athesil RTV silicone sealant. A premium sealant/ gasket maker developed by Athena for professional use in engine maintainace and repair. The RTV (room temperature vulcanizing) silicone seals plastic metal componants, crankcases, manifolds ...

3 outlet water pump to fit carburettor equipped 105 Series cars from 1972 through to 1986 with cable driven tachometers. Please compare pictures to your water pump carefully, before ordering. For cars with electronic tachometers, use the pump...

2 outlet Water Pump to suit car fitted with alternators (large diameter pulley - 112mm) from 1968 onwards. Kit includes gasket.

Water pump gasket to fit 101 and 105 series engines. Also fits twinspark engines.

Fan belt to fit 105 Series cars with alternators. Also fits 2600 models with dynamos/generators. Length - 825mm

Fan belt to fit 1300 engined cars with an alternator. Length - 813mm

Engine cooing system thermostat housing. To fit most 105 Series cars from 1968-83 plus some 116 models. As the intake manifolds are interchangeable, these are often found on earlier cars as well, so please check that your car has the relevant style of...

Gasket to fit the thermostat housing with the 'drop in' style thermostat fitted to 105 Series cars from approx 1968 to 1982.

'Drop in' style engine cooling system thermostat to fit most 105 Series cars from 1968-83, all Montreals and some Alfetta models. As the intake manifolds are interchangeable, these are often found on earlier cars as well, so please check that your...

Inlet manifold outlet for the heater hose 10mm. 

Inlet manifold outlet for the heater hose 6mm. 

Inlet manifold bleed screw.

Water temperature sender - screws into the inlet manifold on all 105 Series cars. Thread dimensions - M16x1.5

Red sticker for rad cap

Square style radiator cap to suit 1750 105-series models from 1968 onwards, all Montreals and most 105/115 series models from 1970 onwards. Also fits many 116 and 75 models. Pressure rated to 0.7 bar - 10 psi.

2 piece radiator mounting rubber. 4 required per car up to 1968, two required per car 1968 onwards.

Bottom support rubber for all radiators that sit on the front crossmember of the car. Suits GTVs, Spiders and Saloons from 1968 to 1988 and GT Juniors from 1970 onwards.  ONE only required per car.

Chromed cap for radiator expansion tank. New tanks are available under code WA042.

Metal strap to hold the radiator expansion tank to the inner wing on all 105 Series cars with a radiator expansion tank/overflow bottle. New tanks are also available under code WA042. ** Please note, if you have a RHD car this strap will need to be...

Radiator expansion tank to fit carburettored GTVs, Spiders and Saloons from 1968 onwards and GT Juniors from 1970 onwards. Caps are also available under code WA051.

Cap for radiator expansion tank. New tanks are available under code WA042.

Radiator fan to fit 1300, 1600 & 1750 engines. Also suitable for 101 Giulia.

Later style heater valve that attaches direct to the heater matrix. Suitable for cars from about 1968 onwards (including Montreal), depending upon when the model changed over. This style valve has been available for many years in plastic but has now been...

Small rubber gasket/seal to suit the later style heater valve (part number WA020) where it attaches direct to the heater matrix.