-
EX034 EXHAUST FITTING KIT
A useful kit containing all the items you would normally need to fit a standard exhaust onto a 105 Series car. See also EX036 for the metal plates and inserts for the rubber hangers.
¥3,458.68 -
EX021 EXHAUST MANIFOLD NUT
Exhaust manifold nut to suit 101, 105, 116 and 75 engines, including V6. 8 fitted per cylinder head. These are a smaller outer diameter than the original which makes tightening easier as you have more access room around the nut.
¥177.61 -
EX020 EXHAUST/INLET MANIFOLD STUD
Exhaust/inlet manifold stud to suit all 4 cylinder 101, 105, 116 and 75 engines, including TS. There are 8 on the exhaust side and 7 on the inlet side, of which three are longer and not currently available. Length - 34mm ** NOTE ** -...
¥233.69 -
EX022 EXHAUST MANIFOLD TO DOWNPIPE GASKET
Copper exhaust manifold to downpipe gasket to suit all European specification exhaust systems on 105/115 and some 750/101/106/102/1900 series cars. Note some US specification cars have a different style 'one piece' gasket which is available under our...
¥280.43 -
EX019 CYLINDER HEAD TO EXHAUST MANIFOLD GASKET
Copper cylinder head to exhaust manifold gasket to suit all 101 and 105 series engines plus 4 cylinder 116 models and 4 cylinder 75 engines (not TS).
¥280.43 -
EX024 RUBBER HANGER FOR EXHAUST SYSTEM
Rubber hanger for the exhaust system on all 105/115 series cars. Normally two per car. Also fitted to 750, 101, 102 (2000) and 106 (2600) Series cars. Note. Metal plates and inserts for the rubber hangers are available under item code EX036.
¥467.39 -
EX036 SET OF METAL PLATES AND INSERT FOR RUBBE…
Set of 2 metal plates and the insert for the bolt hole on the rubber exhaust hanger on all 105/115 series cars. Two sets are required for each hanger, usually 4 per car (2 rubber hangers). Also fitted to 750, 101, 102 (2000) and 106 (2600)...
¥1,308.69 -
EX082 EXHAUST TAILPIPE O RING 68mm
Exhaust tailpipe o-ring for the joint between the centre and rear sections of the exhaust on cars which require a 68mm O ring.
¥747.82 -
EX023 EXHAUST TAILPIPE O RING
Exhaust tailpipe o-ring for the joint between the centre and rear sections of the exhaust on all 105 series cars
¥560.87 -
EX016 REAR EXHAUST SECTION - SPIDER 1971-83
Rear exhaust pipe section to suit all Kamm-Tail/Series 2 Spiders from 1970-83 with the correct 'down turned' style chrome tip. Also used on 1600 Junior Zagato. Made in Italy by IMASAF - OE Quality steel exhaust systems since 1954! Needs EX023...
¥10,282.57 -
EX025 BUSH - GEARBOX/EXHAUST HANGER
Bush for the gearbox/exhaust hanger bracket that bolts to the gearbox or transaxle on 105, 116 and 75 models. 2 required per car on 105 models and 1 per car on 116 and 75 models. Dimensions: Outer Sleeve depth – 15.75mm Inner Sleeve Depth...
¥747.82 -
EX007 FRONT EXHAUST SECTION - 1300 & 1600 CARS…
Front exhaust section, made in Italy by IMASAF - OE Quality steel exhaust systems since 1954! LHD: fits 1600 Roundtail Spiders, 1300/1600 Giulia saloons, Sprint GT/GTV/GTC, GT Juniors and Junior Zagatos with standing pedals to 1971. RHD: as above...
¥18,508.62 -
EX012 MIDDLE EXHAUST SECTION - SPIDER & JUNIOR…
Middle exhaust section to suit all LHD & RHD Roundtail Spiders to 1971 with standing pedals. Will also fit Junior Zagatos of the same age range. Made in Italy by IMASAF - OE Quality steel exhaust systems since 1954! Needs EX027 EXHAUST...
¥11,217.35 -
EX047 REAR EXHAUST SECTION - JUNIOR ZAGATO 130…
Rear exhaust pipe section including muffler, to suit all 1300 Junior Zagato. Made in Italy by IMASAF - OE Quality steel exhaust systems since 1954! Uses EX023 EXHAUST TAILPIPE O RING
¥22,434.70 -
EX027 EXHAUST CLAMP - 54mm
Exhaust clamp to suit all standard sized (54mm) 750, 101 and 105 series exhaust systems. Usually one clamp per car, located on the join between the front and middle exhaust sections.
¥392.61