105 COUPE PARTS : FUEL

Earth strap to fit the carburettor mounts on all 105 Series carburettor cars. Often missing or damaged on many cars we see, ideal to replace when you fit new carburettor mounts.

45mm paper carburettor gasket. ** NOTE ** - Unmodified cars will use the 40mm gasket instead (FL021).

40mm paper carburettor mount gasket to fit 40mm Weber, Solex and Dellorto carburettor mounts. 2 required per rubber mount/carburettor throat. Hole spacing - 72mm ** NOTE ** - Some 1600 S3/S4 Spiders (and some late Alfettas) use a gasket with 80mm...

Solid aluminium 45mm carburettor mount set - 62 mm length to fit 45mm carburettors in black anodised finish.  Machined from solid aluminium then fitted with an O-ring on one face to provide both a seal and some absorption of engine vibration. Supplied...

Set of 4 individual solid alloy carburettor mounts to fit 45mm carburettors. Set includes 'O' rings , thackery washers and nylock nuts for the carb side plus plain nuts for the inlet manifold side. PLEASE NOTE, THE 'O' RING IS FITTED AGAINST THE...

Gasket to fit the crossover style aluminium air filter housing fitted to all twin carburettor 105 Series cars 1300 to 1750 up to 1969. Fits between the lid and the body of the housing that bolts to the carburettors.

Gasket to fit between the air intake trough/plenum and the carburettor body on all carburettored 105, 116 and 75 engines (not TS or V6).

Rubber gasket filter for aluminium trough to tubular air filter canister ('68-'78)

Full carburettor rebuild kit to suit Weber 40 DCOEs - kit does 2 carburettors

Carburettor rebuild kit to suit Weber 45 DCOEs - kit does 2 carburettors

Rebuild kit to suit Solex DDH carburettors. One kit does 2 carburettors.

Carburettor rebuild kit to suit Dell'orto dhla40 carburettors - kit does 2 carburettors.

Carburettor rebuild kit to suit Solex 40mm ADDHE carburettors - kit does 2 carburettors.

Carburettor rebuild kit to suit Weber 40 DCOEs - kit does 2 carburettors

Fuel hose clip to suit all Alfa fuel lines (usually 7mm internal diameter).

Fuel hose (8mm internal diameter) to suit all carburetted cars. Priced per metre (100 cm).

Hand throttle cable stop.

Hand throttle cable to suit all carburetted Spiders 1970-87 with the cable mounted in the centre console. The cable is a solid wire and provided with an extra end piece in case lenght adjustment is required. May also fit Gt Juniors with hand...

Choke cable for all GTs/GTVs, Saloons and Spiders that have the choke lever mounted on the dashboard. Not suitable for 1750 & 2000 Spiders that have the choke mounted on the centre console. See FL025 for that part.

Choke cable to suit all carburetted Spiders 1970-87 with the choke cable mounted in the centre console. The replacement choke cable for other models is available under item code FL036. The cable is a solid wire and provided with an extra...

Rubber seal to fit into the original engine bay Fispa fuel filter/pressure regulator unit fitted to 750, 101 and 105 Series cars. This filter unit uses the smaller 3.3cm diameter filter FL005. Dimensions, outside diameter 53mm,and inside diameter 41mm.

Fuel filter element - larger size, fits into the metal housing found on some later carburetted cars (1975 to 1986) as well as the Filter King fuel filter unit available under code FL053. Dimensions: Height - 4cm Diameter - 4 cm

Fuel filter element small - Fispa type fits in small glass bowl as used on most Alfas from late 1950s until 1975. Includes spring. Dimensions: Height - 4cm Diameter - 3.3cm For the seal between glass bowl and unit please see FL078.

Filter king fuel filter rubber seal.