-
FL027 45mm PAPER CARBURETTOR GASKET
45mm paper carburettor gasket. ** NOTE ** - Unmodified cars will use the 40mm gasket instead (FL021).
£0.99 -
FL021 40mm CARBURETTOR MOUNT GASKET
40mm paper carburettor mount gasket to fit 40mm Weber, Solex and Dellorto carburettor mounts. 2 required per rubber mount/carburettor throat. Hole spacing - 72mm ** NOTE ** - Some 1600 S3/S4 Spiders (and some late Alfettas) use a gasket with 80mm...
£0.40 -
FL018 SOLID ALUMINIUM CARBURETTOR MOUNTS - 45m…
Solid aluminium 45mm carburettor mount set - 62 mm length to fit 45mm carburettors in black anodised finish. Machined from solid aluminium then fitted with an O-ring on one face to provide both a seal and some absorption of engine vibration. Supplied...
£220.00 -
FL082 SOLID ALLOY 45mm CARBURETTOR MOUNTS - IN…
Set of 4 individual solid alloy carburettor mounts to fit 45mm carburettors. Set includes 'O' rings , thackery washers and nylock nuts for the carb side plus plain nuts for the inlet manifold side. PLEASE NOTE, THE 'O' RING IS FITTED AGAINST THE...
£125.00 -
FL060/1 CARBURETTOR AIRBOX GASKET - 105 SERIES…
Gasket to fit the crossover style aluminium air filter housing fitted to all twin carburettor 105 Series cars 1300 to 1750 up to 1969. Fits between the lid and the body of the housing that bolts to the carburettors.
£5.00 -
FL060 CARBURETTOR TO AIRBOX GASKET - NORD
Gasket to fit between the air intake trough/plenum and the carburettor body on all carburettored 105, 116 and 75 engines (not TS or V6).
£1.50 -
FL031 RUBBER GASKET FILTER FOR ALUMINIUM THROU…
Rubber gasket filter for aluminium trough to tubular air filter canister ('68-'78)
£6.30 -
FL108 FULL CARBURETTOR REBUILD KIT - WEBER 40 …
Full carburettor rebuild kit to suit Weber 40 DCOEs - kit does 2 carburettors
£49.00 -
FL011/1 CARBURETTOR REBUILD KIT - WEBER 45 DCO…
Carburettor rebuild kit to suit Weber 45 DCOEs - kit does 2 carburettors
£29.00 -
FL012/1 CARBURETTOR REBUILD KIT - SOLEX DDH
Rebuild kit to suit Solex DDH carburettors. One kit does 2 carburettors.
£29.00 -
FL013 CARBURETTOR REBUILD KIT - DELL'ORTO DHLA…
Carburettor rebuild kit to suit Dell'orto dhla40 carburettors - kit does 2 carburettors.
£29.00 -
FL012 CARBURETTOR REBUILD KIT - SOLEX ADDHE
Carburettor rebuild kit to suit Solex 40mm ADDHE carburettors - kit does 2 carburettors.
£29.00 -
FL011 CARBURETTOR REBUILD KIT - WEBER 40 DCOE
Carburettor rebuild kit to suit Weber 40 DCOEs - kit does 2 carburettors
£28.00 -
FL026/1 FUEL HOSE CLIP 12-14 mm
Fuel hose clip to suit all Alfa fuel lines (usually 7mm internal diameter).
£0.40 -
FL026 FUEL HOSE (8mm DIAMETER) PER ONE METRE
Fuel hose (8mm internal diameter) to suit all carburetted cars. Priced per metre (100 cm).
£8.00 -
FL086 HAND THROTTLE CABLE STOP
Hand throttle cable stop.
£2.25 -
FL025/1 SPIDER HAND THROTTLE CABLE 1970-87 & S…
Hand throttle cable to suit all carburetted Spiders 1970-87 with the cable mounted in the centre console. The cable is a solid wire and provided with an extra end piece in case lenght adjustment is required. May also fit Gt Juniors with hand...
£24.00 -
FL036 CHOKE CABLE - DASH MOUNTED
Choke cable for all GTs/GTVs, Saloons and Spiders that have the choke lever mounted on the dashboard. Not suitable for 1750 & 2000 Spiders that have the choke mounted on the centre console. See FL025 for that part.
£5.95 -
FL025 SPIDER CHOKE CABLE 1970-87 & SOME GT JUN…
Choke cable to suit all carburetted Spiders 1970-87 with the choke cable mounted in the centre console. The replacement choke cable for other models is available under item code FL036. The cable is a solid wire and provided with an extra...
£26.95 -
FL078 RUBBER SEAL FOR FISPA FILTER UNIT
Rubber seal to fit into the original engine bay Fispa fuel filter/pressure regulator unit fitted to 750, 101 and 105 Series cars. This filter unit uses the smaller 3.3cm diameter filter FL005. Dimensions, outside diameter 53mm,and inside diameter 41mm.
£3.95 -
FL006 FUEL FILTER ELEMENT - LARGE (FILTER KING…
Fuel filter element - larger size, fits into the metal housing found on some later carburetted cars (1975 to 1986) as well as the Filter King fuel filter unit available under code FL053. Dimensions: Height - 4cm Diameter - 4 cm
£4.50 -
FL005 FUEL FILTER ELEMENT - SMALL
Fuel filter element small - Fispa type fits in small glass bowl as used on most Alfas from late 1950s until 1975. Includes spring. Dimensions: Height - 4cm Diameter - 3.3cm For the seal between glass bowl and unit please see FL078.
£4.50 -
FL053/1 FILTER KING FUEL FILTER RUBBER SEAL
Filter king fuel filter rubber seal.
£3.95 -
FL053 FILTER KING FUEL FILTER & REGULATOR WITH…
Filter king fuel filter & regulator with glass bowl
£75.00