105 SPIDER PARTS : CYLINDER HEAD

Hose from the bottom of the oil separator cannister to the fuel injection plenum on late model Spiders 1988-93.

Oil breather hose to suit fuel injected Spiders from 1988 to 1993. Goes from the cam cover to the oil separator unit mounted on the inner wing/fender.

Bracket fitted on top of cylinder head used to lift engine out, fitted to 101, 105, 116 and 75 engines (excluding TS and V6). 

Set of six 'washers' (four fibre, two aluminium) for the cam/valve cover hold down bolts on all 101, 105, 116 and 75 engines (excluding Ts and V6). The same washers are also used on Montreal engines - please enquire in need. Note that the aluminium...

A pair of 'half moon' rubber seals for the back of the camshaft housing at the rear of the cylinder head on 4 cylinder 105, 116 and 75 engines.

Lower valve spring cup washer. To suit 4 cyl 101, 105, 116 and 75 engines including TS.

Set of standard valve springs to suit all 4 cylinder 101, 105, 116 and 75 engines, including TS.

Oversize (14.10mm) exhaust valve guide to suit all 4 cylinder 101, 105, 116 and 75 engines, plus Montreal - with 9mm valve stems. Not TS. Sold individually.

Oversize (14.10mm) inlet valve guide to fit all 4 cylinder 101, 105, 116 and 75 engines - plus Montreal - with 9mm valve stems. Not TS. Sold individually. Note, these can also be used as an exhaust valve guide if you wish to fit valve stem seals on...

Exhaust valve guide to suit all 4 cylinder 101, 105, 116 and 75 engines, plus Montreal - with 9mm valve stems. Not TS. Sold individually.

Inlet valve guide to fit all 4 cylinder 101, 105, 116 and 75 engines - plus Montreal - with 9mm valve stems. Not TS. Sold individually. Note, these can also be used as an exhaust valve guide if you wish to fit valve stem seals on the exhaust valves...

OE quality valve guide stem seal -  to fit the inlet valve guide on all 101, 105, 116 and 75 engines (including V6) with 9mm valves and valve guide stem seals. Goetze brand or similar. Also used on the inlet guide on Montreal engines. Not suitable for TS.

Full box of valve shim sizes to fit standard valve stem size of 9mm. Suitable for all 4 cylinder 101, 105, 116 and 75 engines including V6 but excluding TS. In increments of .025mm from 2.525 to 3.500 mm. 5 shims per size.

Full box of valve shim sizes to fit standard valve stem size of 9mm. Suitable for all 4 cylinder 101, 105, 116 and 75 engines including V6 but excluding TS. In increments of .025mm from 1.500 to 2.500 mm. 5 shims per size.

Full box of valve shim sizes to fit GTA, 750 Giulietta and 75 Twin Spark engines. In increments of .025mm from 2.525 to 3.500 mm. 5 shims per size.

Full box of valve shim sizes to fit GTA, 750 Giulietta and 75 Twin Spark engines. In increments of .025mm from 1.500 to 2.500 mm. 5 shims per size.

Set of fuel MULTIPOINT injectors for Bosch Motronic 89-93. These injectors Replace Yellow Bosch 0280150962

Valve shim to fit GTA, 750 Giulietta and 75 Twin Spark engines. They are available in increments of .025mm from 1.500 (.059")  to 3.500 mm (.138"). Please select size from the drop-down menu.       

Spider set of fuel injectors for Bosch Motronic 89-93. Late series 3 and all series 4. Direct replacement for Yellow Bosch 0280150764 ( Alfa Romeo Part Number 6051 95 810, 6054 56 910 , 115 88 11 300 00 ) Alfa Spider 2.0L ...

Valve shim to fit standard valve stem size of 9mm - available in sizes from 1.5mm (.059") to 3.5mm (.138"). Suitable for all 4 cylinder 101, 105, 116 and 75 engines including V6 but excluding TS. Please specify the sizes you need on the drop-down menu...

Oversized +010 exhaust valve seat to suit 2000 Nord engines.

Oversized +010 inlet valve seat to suit 2000 Nord engines.

Oversized +010 exhaust valve seat to suit 1600/1750 Nord engines.

Oversized +010 inlet valve seat to suit 1600/1750 Nord engines.