null

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

JUNIOR ZAGATO PARTS : ENGINE BLOCK

  • PRODUCTS PER PAGE
  • EN040 CRANK SPIGOT BUSH - HYDRAULIC CLUTCH CARS

    EN040 CRANK SPIGOT BUSH - HYDRAULIC CLUTCH CAR…

    Standard clutch spigot bush (24mm) to suit  hydraulic clutch 105 series twin cam engines. Also fits Montreal engines Please note some early 1750 engines uses te earlier bush - sold under code EN101. ** NOTE ** - If you are having a later crank (75 twin...

    £6.50
  • EN058 105 SERIES ENGINE OIL PUMP

    EN058 105 SERIES ENGINE OIL PUMP

    Oil pump. New 2020 production (improved gear material and correct size mounting holes). Includes the three mounting bolts. Fits cars from 1966 onwards. Gear length is 36mm (as on the later uprated pumps). Installation tip -  When you fit the pump you...

    £200.00
  • EN091 SUMP PLUG WASHER

    EN091 SUMP PLUG WASHER

    Sump plug washer for most 750/101/102/106/105 series twin-cam engines. We supply copper or aluminium depending on availability from our suppliers - both work equally well. We recommend you replace any crush washer once it has been used more than once, to...

    £0.75
  • EN059 OIL SUMP PLUG (WITH MAGNET)

    EN059 OIL SUMP PLUG (WITH MAGNET)

    Oil sump plug to suit all 4 cylinder  750/101/106/105/116 series engines. Includes inbuilt magnet to keep unwanted debris out of your oil! Copper washers to fit the sump plug are also available under item code EN091.

    £8.50
  • EN151/1 1600/1750/MONTREAL LINER SEAL

    EN151/1 1600/1750/MONTREAL LINER SEAL

    Cylinder liner seal to fit all 1600 and 1750 (1779cc) 'Nord' engines as well as Montreal V8 engines. Sold individually.  

    £2.10
  • EN094 BOTTOM SUMP PAN

    EN094 BOTTOM SUMP PAN

    Bottom sump pan to suit all normal 105 series cars (not GTA - see EN540). Fits cars from 1966 onwards.

    £125.00
  • EN060 SUMP GUARD

    EN060 SUMP GUARD

    Sump guard to fit all 105 Series cars. Zinc plated.

    £75.00
  • EN056 OIL PRESSURE SENDER - ALL JAEGER GAUGES SOME VEGLIA GAUGES AFTER 1968

    EN056 OIL PRESSURE SENDER - ALL JAEGER GAUGES …

    Oil pressure sender to fit all 105 Series cars with Jaeger gauges and some cars with Veglia gauges from 1968 onwards. Also fits Montreals and 116 models that have Jaeger instruments. Thread size: M10 x 1.0

    £30.00
  • EN038 CORTECO REAR CRANKSHAFT OIL SEAL 105-82-12MM

    EN038 CORTECO REAR CRANKSHAFT OIL SEAL 105-82-…

    Top quality Corteco rear crankshaft oil seal for 101, 105 and some 116 engines. Also fits GTV6 and 75 V6. Not fuel injected spiders or TS. Ideal for race / performance engines. See item code EN102 for the deeper style seal used on Series 4 Spider...

    £15.00
  • EN121 SPICA INJECTION FRONT CRANKSHAFT PULLEY TAB WASHER

    EN121 SPICA INJECTION FRONT CRANKSHAFT PULLEY …

    Tab washer for the nut that holds on the front crankshaft pulley for all 4Cyl Spica equipped models. We recommend you replace any tab washer once it has been used more than once. Alfa Romeo OE part number 105.50.02.104.00

    £3.95
  • EN090/1 CONROD NUT TAB WASHER 1300 ENGINES ONLY

    EN090/1 CONROD NUT TAB WASHER 1300 ENGINES ONL…

    Conrod nut tab washer for all 101 and 105 series twin-cam 1300 engines. Two required per conrod, 8 in total per engine. We recommend you replace any tab washer once it has been used more than once.  

    £1.30
  • EN114 TAB WASHER - 8 BOLT FLYWHEEL

    EN114 TAB WASHER - 8 BOLT FLYWHEEL

    Tab washer to suit the retaining bolts on an 8 bolt flywheel as fitted to 1300, 1600 and 1750 engines (except for 1600 Spider S4 engines that use 6 bolt flywheels). 4 required per engine. We recommend you replace any tab washer once it has been...

    £2.20
  • EN113 TAB WASHER - 5TH MAIN BEARING CAP

    EN113 TAB WASHER - 5TH MAIN BEARING CAP

    Later style rear main bearing cap tab washer to suit all 4 cyl 101, 105, 116 and 75 engines. 101 and early 105 series engines originally had a long 'strip' style one piece tab washer, but that was amended in the late 1960s to a smaller two piece style we...

    £1.10
  • EN112 FRONT CRANKSHAFT PULLEY TAB WASHER

    EN112 FRONT CRANKSHAFT PULLEY TAB WASHER

    Tab washer for the nut that holds on the front crankshaft pulley on all 4cyl 101, 105 and 116 engines excluding TS and Spica equipped models. We recommend you replace any tab washer once it has been used more than once. If you require the...

    £3.30
  • EN090 CONROD NUT TAB WASHER

    EN090 CONROD NUT TAB WASHER

    Conrod nut.  Two required per conrod, 8 in total per engine. 1600-2000 engines only, including TS.  We recommend you replace any tab washer once it has been used more than once.  

    £1.15

Follow Us @classicalfaltd