116 ALFETTA PARTS : CYLINDER HEAD

Oil filler cap seal 

Oil filler cap -  metal bayonet style as fitted to most Nord twin-cam engines and 2600 models.

Exhaust manifold nut to suit 101, 105, 116 and 75 engines, including V6. 8 fitted per cylinder head. These are a smaller outer diameter than the original which makes tightening easier as you have more access room around the nut.

Exhaust/inlet manifold stud to suit all 4 cylinder 101, 105, 116 and 75 engines, including TS. There are 8 on the exhaust side and 7 on the inlet side, of which three are longer and not currently available. Length - 34mm ** NOTE ** -...

Black plastic style bayonet fixing Olio cap Fits late 105 spiders plus GTV6 and 75.

Cylinder head nut washer to fit 1750/2000 engines.

Cylinder head nut in black for 105, 1750 2000 engines, including TS.

Chromed cylinder head nut for 1300 1600 engines.

Cylinder head nut for 105, 1300 1600 engines.

Chromed cylinder head nut for 1750 2000 engines with larger head studs including TS.

Later style valve/cam cover hold down bolt with the large flats suitable for use with a 17mm spanner. Fits 4 cyl 105, 116 and 75 engines.

Curved oil breather hose from the cam cover to the air filter canister on many of the 105 and 116 series cars. This fits both the early style 'crossover' air-cleaner setups as well as the later tubular style air-cleaners.

Bracket fitted on top of cylinder head used to lift engine out, fitted to 101, 105, 116 and 75 engines (excluding TS and V6). 

Set of six 'washers' (four fibre, two aluminium) for the cam/valve cover hold down bolts on all 101, 105, 116 and 75 engines (excluding Ts and V6). The same washers are also used on Montreal engines - please enquire in need. Note that the aluminium...

A pair of 'half moon' rubber seals for the back of the camshaft housing at the rear of the cylinder head on 4 cylinder 105, 116 and 75 engines.

Lower valve spring cup washer. To suit 4 cyl 101, 105, 116 and 75 engines including TS.

Set of standard valve springs to suit all 4 cylinder 101, 105, 116 and 75 engines, including TS.

Oversize inlet valve guide to fit all 4 cylinder 101, 105, 116 and 75 engines - plus Montreal - with 9mm valve stems. Not TS. Sold individually. Note, these can also be used as an exhaust valve guide if you wish to fit valve stem seals on the...

Exhaust valve guide to suit all 4 cylinder 101, 105, 116 and 75 engines, plus Montreal - with 9mm valve stems. Not TS. Sold individually.

Inlet valve guide to fit all 4 cylinder 101, 105, 116 and 75 engines - plus Montreal - with 9mm valve stems. Not TS. Sold individually. Note, these can also be used as an exhaust valve guide if you wish to fit valve stem seals on the exhaust valves...

OE quality valve guide stem seal -  to fit the inlet valve guide on all 101, 105, 116 and 75 engines (including V6) with 9mm valves and valve guide stem seals. Goetze brand or similar. Also used on the inlet guide on Montreal engines. Not suitable for TS.

Valve shim to fit standard valve stem size of 9mm - available in sizes from 1.5mm (.059") to 3.5mm (.138"). Suitable for all 4 cylinder 101, 105, 116 and 75 engines including V6 but excluding TS. Please specify the sizes you need on the drop-down menu...

Oversized +010 exhaust valve seat to suit 2000 Nord engines.

Oversized +010 inlet valve seat to suit 2000 Nord engines.