The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

105 SPIDER PARTS : CLUTCH

  • CL008 ORIGINAL EQUIPMENT SACHS 3 PIECE HYDRAULIC C…

    Original equipment Sachs 3 piece hydraulic clutch kit (pressure plate, friction plate and release bearing) - to fit all 105 Series cars 1968-1993 (excluding Montreals) Please note this is the original equipment as used by Alfa...

    ¥23,193.75
  • CL004 CLUTCH SLAVE CYLINDER

    Clutch slave cylinder to fit all 105/115 Series cars 1968 onwards.

    ¥4,365.88
  • CL006/2 HYDRAULIC CLUTCH FLEXI HOSE NUT

    Nut for attaching the clutch flexi hose to the bracket on the rear of the crossmember on all hydraulic clutch 105 Series cars.

    ¥327.44
  • CL001 CLUTCH MASTER CYLINDER - ALL STANDING PEDALS…

    Clutch master cylinder to fit all 105 Series cars with standing pedals - all hydraulic clutch right hand drive cars 1968-78 and left hand drive cars from 1968 to 1970 Not suitable for cars with hanging brake + clutch pedals.

    ¥12,961.21
  • CL001/1 CLUTCH MASTER CYLINDER REPAIR KIT - STANDI…

    Clutch master cylinder repair kit to fit Bonaldi master cylinders fitted to all 105 Series cars with standing pedals (LHD cars to about 1970 and all RHD cars). Will not fit ATE cylinders.

    ¥2,448.99
  • CL003/1 CLUTCH MASTER CYLINDER REPAIR KIT - HANGIN…

    Clutch master cylinder repair kit to fit all left hand drive cars with hanging pedals, including some Montreals. Please check your old cylinder before ordering - if your master cylinder has 3 seals not 2 then this kit will not be correct.

    ¥2,046.51
  • CL002 RESERVOIR FOR LHD CLUTCH MASTER CYLINDER

    Reservoir to fit the clutch master cylinder available under code CL003. Fits all left hand drive 105 series cars with hanging pedals, including Series 3 and Series 4 Spiders and Montreals.

    ¥5,389.14
  • CL036 CLUTCH FLUID RESERVOIR FOR RHD CARS (+ SOME …

    Genuine ATE clutch fluid reservoir. Fits all RHD cars from 1970 to 1978 with twin servo braking system, and US-market 1750 GTV mk1 and Round Tail Spider with twin servo braking system. Comes complete with new cap and bracket.

    ¥6,480.61
  • CL012 CLUTCH MASTER CYLINDER COVER - LHD

    Beautifully fabricated clutch master cylinder cover to fit left hand drive cars with standing pedals up to 1970. Reproduced as a direct copy of the original, including the pressed drain holes, in galvanized steel and finished in satin black.

    ¥7,503.86
  • CL013 MECHANICAL CLUTCH RELEASE BEARING

    Genuine Fitchel & Sachs mechanical/cable clutch release bearing to suit clutches on 750, 101 and early 105 series cars. WHEN ORDERING - PLEASE ALSO ORDER 2 x CL013/1 RETAINING CLIPS TO SUIT THIS NEWER DESIGN OF RELEASE BEARING.

    ¥4,775.18

Follow Us @classicalfaltd